Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BenQ MX825ST
Summarization of Contents
Warranty and Copyright Information
Limited Warranty
Details BenQ's warranty against defects in material and workmanship.
Copyright
States copyright © 2017 by BenQ Corporation, all rights reserved.
Disclaimer
BenQ Corporation disclaims all warranties, express or implied, regarding the contents.
Introduction
Shipping Contents
Lists and describes standard and optional accessories included with the projector.
Replacing the Remote Control Batteries
Provides step-by-step instructions for replacing remote control batteries.
Controls and Functions
Projector & Remote Control
Describes the buttons and functions of the projector and its remote control.
Controlling Your Smart Device with the Remote Control
Explains how to control a smart device using the projector's remote control via MHL mode.
Remote Control Effective Range
Details the optimal distance and angle for using the remote control with the projector.
Positioning Your Projector
Choosing a Location
Factors to consider when selecting an installation location for the projector.
Mounting the Projector
Provides recommendations and warnings for mounting the projector securely.
Adjusting the Projected Image
Details how to adjust the projection angle using adjuster feet and auto-adjusting the image.
Fine-tuning the Image Clarity
Explains how to adjust image clarity by rotating the focus ring and correcting keystoning.
Connection
Connecting Audio
Describes the projector's audio capabilities and how to connect audio sources.
Operation
Starting Up the Projector
Step-by-step guide for powering on the projector and initial setup.
Securing the Projector
Details how to use a security cable lock and set up a password for the projector.
Shutting Down the Projector
Instructions for properly powering off the projector and its direct power off function.
Basic Menu
Picture Mode
Describes various predefined picture modes for optimizing image quality.
Lamp Mode
Details the available lamp modes for extending lamp life and adjusting brightness.
Information
Lists various information displayed by the projector, such as resolution and firmware version.
Advanced Menu
Picture
Covers advanced picture settings including Picture Mode, Reference Mode, Brightness, Contrast, Color, Tint, and Sharpness.
Display
Covers display settings like Aspect Ratio, Keystone, Test Pattern, and PC/Component YPbPr Tuning.
3D
Explains the 3D function, modes, and settings for viewing 3D content.
Operation Settings
Quick Cooling
Enables a function to shorten the projector cooling time from 90 to approximately 15 seconds.
High Altitude Mode
Recommends using High Altitude Mode for environments above 1500m to prevent overheating.
Power On/Off Settings
Configures direct power on, signal power on, auto power off, and power off timer.
System
Language
Sets the language for the On-Screen Display (OSD) menus.
Standby Settings
Configures network standby, monitor out, and audio pass-through settings.
Menu Settings
Configures menu type (Basic/Advanced) and OSD display time.
Maintenance
Care of the Projector
Provides instructions for cleaning the projector lens and case.
Lamp Information
Explains how to check lamp usage hours and calculate equivalent lamp hours.
Replacing the Lamp
Step-by-step guide for safely replacing the projector lamp, including safety precautions.
Specifications
Projector Specifications
Lists optical, electrical, mechanical, control, and input/output specifications.
Environmental Requirements
Details operating and storage conditions for temperature, humidity, and altitude.
Need help?
Do you have a question about the MX825ST and is the answer not in the manual?
Questions and answers