Table of Contents
Advertisement
Operation Manual
English
cuvetteMIXdrive 1
MIXdrive 1 XS
MIXdrive 1 eco
MIXdrive 1
MIXdrive 6
MIXdrive 15
MIXdrive 60
MIXdrive OEM
MIXdrive 1 XS HT
MIXdrive 1 eco HT
MIXdrive 1 HT
MIXdrive 6 HT
MIXdrive 15 HT
MIXdrive 60 HT
MIXdrive OEM HT
MIXcontrol eco
MIXcontrol eco DINrail (0-10V)
MIXcontrol eco DINrail (Poti)
MIXcontrol 20
MIXcontrol 20 RS232
MIXcontrol 20 DINrail (0-10V)
MIXcontrol 20 DINrail (RS232)
MIXcontrol 40
MIXcontrol 40 RS232
MIXcontrol 40 DINrail (0-10V)
MIXcontrol 40 DINrail (RS232)
Version 5.1
Issue 10/2015
Order no.: 40400
Order no.: 40300
Order no.: 40101
Order no.: 40001
Order no.: 40006
Order no.: 40015
Order no.: 40060
Order no.: 4xxxx
Order no.: 40303
Order no.: 40301
Order no.: 40201
Order no.: 40206
Order no.: 40215
Order no.: 40260
Order no.: 4xxxx
Order no.: 90100
Order no.: 90150
Order no.: 90140
Order no.: 90200
Order no.: 90210
Order no.: 90220
Order no.: 90221
Order no.: 90400
Order no.: 90410
Order no.: 90420
Order no.: 90421
www.2mag.de
with
Advertisement
Table of Contents
Related Manuals for 2mag MIXdrive 1 eco
Summary of Contents for 2mag MIXdrive 1 eco
- Page 1 Order no.: 40006 MIXdrive 15 Order no.: 40015 MIXdrive 60 Order no.: 40060 MIXdrive OEM Order no.: 4xxxx MIXdrive 1 XS HT Order no.: 40303 MIXdrive 1 eco HT Order no.: 40301 MIXdrive 1 HT Order no.: 40201 MIXdrive 6 HT Order no.: 40206...
- Page 2 Includes: Quick start Operation Manual Technical Documentation Specifications © 2mag AG Page 2 of 44 Version: 5.1...
- Page 3 For any enquiries, questions or suggestions please do not hesitate to contact us at info@2mag.de. 2mag Main competence of 2mag is based upon mixing, tempering and measuring/controlling. In these fields we are offering support with our products to the modern laboratory within the standardized daily business as well as for the implementation of highly complex processes in the state-of-the-art research.
-
Page 4: Table Of Contents
5.1 Accessory – Stainless Steel Bath mixBATH ______________________ 32 6. Maximum operation temperatures _______________________________ 33 B Maintenance, Cleaning and Care ____________________________ 34 C Service case and customer service ___________________________ 35 D Errors _________________________________________________ 36 E Technical details _________________________________________ 37 © 2mag AG Page 4 of 44 Version: 5.1... -
Page 5: A Quick Start
An external control unit with one connector socket (MIXcontrol eco / MIXcontrol 20) respectively two connector sockets (MIXcontrol 40) for connection of the stirrer control cables as well as a pluggable power cable (country-specific) and with RS232 PC-interface (option). © 2mag AG Page 5 of 44 Version: 5.1... -
Page 6: Applications
Stirring and warming of flammable liquids Warming of pressure-tight closed and NOT pressure- resistant vessels or glasses (e.g. Erlenmeyer flasks, lab flasks) At general atmosphere or danger of explosion © 2mag AG Page 6 of 44 Version: 5.1... -
Page 7: Combinations Of Vessels
The 2mag is offering special products for the just mentioned application combinations. More information for this can be found at www.2mag.de info@2mag.de 2.5 Combinations of vessels Please use round, chemical resistant and where required heat-resistant vessels made of glass or non-magnetic metal. You can use vessels up to the maximum size stated in the spreadsheet 1. -
Page 8: Stirring Bars
2.6.1 ASTEROID Stirring Bars We recommend using 2mag –ASTEROID stirring bars to increase the stirring performance at enhanced requirements. ASTEROID stirring bars a newly developed, high-effective and ideal for: ... -
Page 9: Tips And Hints To The Topic Stirring
In case the stirring activity is too weak: Use commercial magnetic stirring bars with SamariumCobalt-core. Use a longer stirring bar or a stirring flask with smaller diameter. We recommend using 2mag – ASTEROID stirring bars to increase the stirring performance. © 2mag AG Page 9 of 44 Version: 5.1... -
Page 10: Installation
To increase the operation safety, the control unit should be placed apart from chemical materials and reactions as well as away from thermal influences. For special requirements please contact info@2mag.de. ATTENTION! The control unit has to be switched off, BEFORE you connect or disconnect the plugs. -
Page 11: Installation, Connection To The Control Unit Mixcontrol Eco
Connect the power supply unit (1) with power socket The control unit is now connected to the magnetic stirrer and ready for operation. Image 3: Installation, magnetic stirrer MIXdrive with control unit MIXcontrol eco © 2mag AG Page 11 of 44 Version: 5.1... - Page 12 Socket for control cable for the magnetic stirrer Control cable of the magnetic stirrer Magnetic stirrer Changeable country-specific power adapter (content of delivery) Image 4: Installation, close-up of control unit MIXcontrol eco © 2mag AG Page 12 of 44 Version: 5.1...
-
Page 13: Installation, Connection To The Control Unit Mixcontrol 20
Description functional elements of control unit - backside Connector of the stirrer control cable Socket for the stirrer control cable Power socket Power cable Power switch Control unit 2mag – MIXcontrol 20 Stirring drive unit 2mag - MIXdrive © 2mag AG Page 13 of 44 Version: 5.1... -
Page 14: Installation, Connection To The Control Unit Mixcontrol 40
Description functional elements of control unit - backside Connector of the stirrer control cable Socket for the stirrer control cable Power socket Power cable Power switch Control unit 2mag - MIXcontrol 40 Stirring drive unit 2mag - MIXdrive © 2mag AG Page 14 of 44 Version: 5.1... -
Page 15: Operating Of The Control Units
4. Operating of the control units 4.1. Operating of the control unit MIXcontrol eco Image 6: Functional elements, control unit MIXcontrol eco 4.1.1 Description functional elements MIXcontrol eco Control unit 2mag - MIXcontrol eco ON/OFF and SPEED-button © 2mag AG Page 15 of 44... -
Page 16: Stirring Operation And Stirrer Control Mixcontrol Eco
© 2mag AG Page 16 of 44 Version: 5.1... -
Page 17: Operating Of The Control Unit Mixcontrol 20/40
Image 7: Control unit MIXcontrol 20 / 40 Image 8: Close-up, operating elements control unit MIXcontrol 20 / 40 4.2.1 Description operating elements MIXcontrol 20/40 Control unit 2mag - MIXcontrol 20 / 40 Stirrer control ON/OFF key for magnetic stirrer... -
Page 18: Stirring Operation And Stirrer Control Mixcontrol 20/40
5 seconds. The power adjustment is finished again at the time the speed range is shown. The power adjustment can also be finished immediately by pressing the MODE-key (9) again. © 2mag AG Page 18 of 44 Version: 5.1... - Page 19 © 2mag AG Page 19 of 44 Version: 5.1...
-
Page 20: Interface (Analog) - 0-10 Volts
Supply voltage: Stirring power: 20 watts, not adjustable Speed range: 100–2000 rpm Control voltage / rpm correlation: linear < 0,25V (ca. 0,03V hysteresis) 100 rpm 0,25V – 0,28V 2000 rpm > 9,4V © 2mag AG Page 20 of 44 Version: 5.1... -
Page 21: Pin-Assignment, Sub-D Connector
Support: info@2mag.de D-Sub (9-pole) male connector, backside view: 5 – Ground 9 – 0 to 10 V control voltage free wired cables (depending on version) socket on request © 2mag AG Page 21 of 44 Version: 5.1... -
Page 22: Pin-Assignment - Mixcontrol Eco - Housing For Cap Rails
4.3.3. PIN-assignment – MIXcontrol eco – housing for cap rails supply voltage - 24 VDC + 0-10V control voltage Brown white green yellow colors – connection cable stirring drive Image 9: Pin-assignment of MIXcontrol eco DINrail © 2mag AG Page 22 of 44 Version: 5.1... -
Page 23: Connections/Pin-Assignment - Mixcontrol 20/40 Dinrail
Description functional elements of MIXcontrol 20/40 DINrail Power socket 48 VDC Socket for the stirrer control cable (1x for MIXcontrol 20, 2x for MIXcontrol 40) 0-10V interface RS232 interface (SUB-D) (instead of 0-10V Schnittstelle, not shown) © 2mag AG Page 23 of 44 Version: 5.1... -
Page 24: Pc-Interface - Rs232
Spread sheet 2: Commands – interface RS232 Each entering of the complete command has to be finished with the ASCII code “Carriage Return (CR)”. There is no determination of small and capital letters. © 2mag AG Page 24 of 44 Version: 5.1... -
Page 25: Format - Command - Feedback
The manual parameters can be changed only by the keys during running in the manual mode and the remote parameter only by the RS232 interface during running in the remote mode! © 2mag AG Page 25 of 44 Version: 5.1... -
Page 26: Control Of More Than One Units
It can be connected more than one control unit with only one interface. All control units are connected with the help of a special needed 2mag adapter box with a standard RS232 cable to the PC and to the controllers. -
Page 27: Control With Hyperterminal
HyperTerminal allows the adjustment of the time between two commands via the line delay in the ASCII configuration. For manual sending of commands via HyperTerminal the ASCII configuration must be set which is shown in screenshot 4. © 2mag AG Page 27 of 44 Version: 5.1... -
Page 28: Screenshots - Preferences Hyperterminal
– 4.4.6. Screenshots Preferences HyperTerminal Screenshot 1 Screenshot 2 © 2mag AG Page 28 of 44 Version: 5.1... - Page 29 Screenshot 3 Screenshot 4 © 2mag AG Page 29 of 44 Version: 5.1...
-
Page 30: Combinations Stirring Drives - Control Units
(in air and submersed) MIXdrive 6 MIXcontrol eco MIXdrive 1 MIXcontrol 20 MIXcontrol eco MIXdrive 1 eco MIXcontrol eco MIXdrive 1 XS cuvetteMIXdrive MIXdrive (HT) MIXdrive 60 HT MIXcontrol 40 (HT = High Temperature) MIXdrive 15 HT MIXcontrol 20 up to +200 °C (in air) -
Page 31: Accessory - Distributor Distribox 4 / Distribox 8
With help of the accessory item distriBOX 4/8 can be connected several stirring drives with only one control unit. Therefore e.g. 4x MIXdrive 1 XS can be operated synchronous with the control unit MIXcontrol 40. Please note that the stirring power will be divided by the connected number of stirring drives. -
Page 32: External Heating Operation In Incubators And Water Baths
The integrated left-/right body stop is optimized for exact thermostat positioning (pump flow) with using MIXdrive 6 resp. MIXdrive 15. © 2mag AG Page 32 of 44 Version: 5.1... -
Page 33: Maximum Operation Temperatures
Please note the maximum operation temperature +50 °C in water immersed for the standard versions +95°C for the high temperature versions (HT) in water immersed. Operation in higher ambient temperatures can damage the stirring drive. © 2mag AG Page 33 of 44 Version: 5.1... -
Page 34: B Maintenance, Cleaning And Care
The control unit must not be dipped in water or any cleaning solutions. 2mag devices are generally maintenance-free. Due to their construction the 2mag devices are very robust and designed for the professional daily use. We recommend cleaning the devices’ surfaces with e.g. cleaning agents containing tensides or isopropyl alcohol regularly. -
Page 35: C Service Case And Customer Service
Web: www.2mag.de Warranty: Due to their construction, the 2mag devices are very robust and designed for the professional daily use. The magnetic drive works without any mechanically moved parts as e.g. belts, bearings or motors. Therefore a maximum of reliability within daily use is achieved. -
Page 36: D Errors
Please get into contact with us. In general, we are ready to help you in case of problems. For any enquiries, questions or suggestions please do not hesitate to contact us at info@2mag.de © 2mag AG Page 36 of 44 Version: 5.1... -
Page 37: E Technical Details
-40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa conditions Protection category IP 68 Operating voltage 48 VDC Image 11 and 12: Magnetic stirrer cuvetteMIXdrive (left) and MIXdrive 1 XS (right) © 2mag AG Page 37 of 44 Version: 5.1... - Page 38 9.5 kg approx. 9.9 kg Permitted storage -40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa conditions. Protection category IP 68 Operating voltage 48 VDC © 2mag AG Page 38 of 44 Version: 5.1...
- Page 39 Magnetic stirrer MIXdrive 1 XS MIXdrive 1 XS HT Order no. 40303 Stirring points Stirring volume/point 1.000 ml Stirring power (max.) 10 watts Material housing stainless-steel Material sealing silicone Permitted operation -30 up to +200 °C (at 100% humidity) conditions (air) Permitted operation +95 °C in water immersed...
- Page 40 -40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa conditions. Protection category IP 68 Operating voltage 48 VDC Magnetic stirrer MIXdrive OEM / OEM HT The technical data of OEM version are depending on the individual specs. © 2mag AG Page 40 of 44 Version: 5.1...
- Page 41 0 up to +40 °C (at 80% humidity) Permitted storage conditions -40 °C up to +70 °C, 10–95 %, 500–1060 hPa Protection category IP 20 Electrical data 100-240 V / 50-60 Hz / 1.5 A © 2mag AG Page 41 of 44 Version: 5.1...
- Page 42 0.5 kg Permitted operation conditions 0 up to +40 °C (at 80% humidity) Permitted storage conditions -40 °C up to +70 °C, 10–95 %, 500–1060 hPa Protection category IP 20 © 2mag AG Page 42 of 44 Version: 5.1...
- Page 43 40950 Material housing stainless-steel Measurement (BxTxH) 277 x 537 x 175 mm (inside) Measurement (BxTxH) 315 x 575 x 190 mm (outside) Weight approx. 6.0 kg Image 14: Stainless-steel bath mixBATH © 2mag AG Page 43 of 44 Version: 5.1...
- Page 44 Ø 28 x 40 mm Weight ca. 0.06 kg Image 15: Stirring bar ASTEROID 40 2mag AG Fon: +49 89 14334252 Schragenhofstr. 35 J Fax: +49 89 14334369 DE-80992 Muenchen E-Mail: info@2mag.de GERMANY Web: www.2mag.de © 2mag AG Page 44 of 44 Version: 5.1...
- Page 48 1 / MIXdrive 1 XS / 1 eco / 1 / 6 / 15 / 60 / OEM MIXdrive 1 XS HT / 1 eco HT / 1 HT / 6 HT / 15 HT / 60 HT / OEM HT incl.
Need help?
Do you have a question about the MIXdrive 1 eco and is the answer not in the manual?
Questions and answers