Page 1
Operation Manual English MIX 4 MS Order No.: 30404 Includes Quick start Operation Manual Technical Documentation Specifications Version 5.1 Issue 10/2015 www.2mag.de...
3. Installation _____________________________________________ 8 3.1 Safety advice ________________________________________ 8 3.2 Installation, connection to the magnetic stirrer ______________ 9 4. Operation of the magnetic stirrer MIX 4 MS ___________________ 10 4.1 Description operating elements __________________________ 10 4.2 Stirring operation and stirrer control _____________________ 11 4.3 Warning notices: _____________________________________ 13...
A Quick start 1. Overview of your product Magnetic stirrer MIX 4 MS Image 2: 4-position magnetic stirrer MIX 4 MS (without power supply unit 100-240 volts) Your product contains at despatch: A modern inductive magnetic stirring system (MIX 4 MS) consisting of a stainless steel stirring plate with 4 stirring points.
Safety cabinets Safety cabins 2.4 Application not for the intended use The magnetic stirrers MIX 4 MS are explicitly not intended for the application: Stirring and warming of flammable liquids Warming of pressure-tight closed and NOT pressure- resistant vessels or glasses (e.g.
The magnetic stirring bar can then be centred better. Magnetic Stirrer Stirring vessels Nominal content Max. amount MIX 4 MS Erlenmeyer flasks 25 ml und lab flasks 50/100 ml 250/500 ml...
2.6.1 ASTEROID Stirring Bars We recommend using 2mag –ASTEROID stirring bars to increase the stirring performance at enhanced requirements. ASTEROID stirring bars a newly developed, high-effective and ideal for: ...
To increase the operation safety, the power supply unit should be placed apart from chemical materials and reactions as well as away from thermal influences. For special requirements please contact info@2mag.de. ATTENTION! The power supply unit has to be disconnected, BEFORE you connect or disconnect the unit plug.
4. Operation of the magnetic stirrer MIX 4 MS Image 4: Operating elements, magnetic stirrer MIX 4 MS Image 5: Close-up – operation elements, magnetic stirrer MIX 4 MS 4.1 Description operating elements Magnetic stirrer MIX 4 MS Stirrer control...
Operating of the magnetic stirrer After the cables have been installed correctly according to Installation, connection to the magnetic stirrer, the magnetic stirrer MIX 4 MS will be ready for operation. 4.2 Stirring operation and stirrer control Turning On and Off Please press the ON/OFF-key (8) once.
The magnetic stirrer must not be dipped in water or any cleaning solutions. 2mag devices are generally maintenance-free. Due to their construction the 2mag devices are very robust and designed for the professional daily use. We recommend cleaning the devices’ surfaces with e.g. cleaning agents containing tensides or isopropyl alcohol regularly.
Web: www.2mag.de Warranty: Due to their construction, the 2mag devices are very robust and designed for the professional daily use. The magnetic drive works without any mechanically moved parts as e.g. belts, bearings or motors. Therefore a maximum of reliability within daily use is achieved.
E Technical details Magnetic stirrer MIX 4 MS MIX 4 MS Order no. 30404 Stirring points Stirring point distance 140 mm Stirring volume 1 – 3,000 ml Speed range 100 – 2,000 rpm Stirring power (max.) 28 (4x7) watts Material housing...
Page 20
DE-80992 Muenchen GERMANY Hereby declares that the product MIX 4 MS is conform to the appropriate regulations of the EU-guideline of the electromagnetic compatibility (EU-guideline 2014/30/EU) as well as the low voltage directive (2014/35/EU) incl. their changes and the laws for the realization of the guideline into national law.
Need help?
Do you have a question about the MIX 4 MS and is the answer not in the manual?
Questions and answers