ROSE DISPLAYS ANOQUICK SQUARE NO HANGING Manual

TM
AnoQuick

Parts

Instructions for Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Slide the Gotcha Holder into the AnoQuick
Holder. Fig. 2

Step 3

Push end caps into place. Fig. 3
Note: To remove Gotcha (and sign), simply rotate
end cap up out of the way.

Step 4

Suspend poster. Fig. 4

Important note:

Please save and reuse the AnoQuick Holder,
Gotcha Holder, and End Caps for future projects.
The AnoQuick TM is a trademark and Gotcha
Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be
held liable for injury, loss or damage resulting from the use
of these products.
Part #02INSAnoQuick w/Gotcha
Incept-8.15.02
with Gotcha
AnoQuick
Square Profile Gotcha
12A300SQ
® is a registered trademark of
®
Insert

Instruction Sheet

® Special Square End Cap
(no clip rail)
Figure 1
Figure 3
06-5545
Figure 4
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Figure 2