Table of Contents
Advertisement
Quick Links
gomerlin.com.au
gomerlin.co.nz
Linear Actuator Gate Opener
(MGLSK / MGLDK / MGLSK-LV / MGLDK-LV)
Installation and Operating Instructions
Owners Copy: SAVE THESE INSTRUCTIONS for future reference
Visit the Swing L 300 landing pages for:
•
Product features
•
Purchase compatible accessories
•
Handy tips & how-to videos
•
Digital copy of this manual
•
Register your warranty
DO NOT PROCEED WITH THE INSTALLATION BEFORE READING THOROUGHLY
MGLX
This manual contains IMPORTANT SAFETY information
Advertisement
Table of Contents
Related Manuals for Merlin MGLDK
Summarization of Contents
SAFETY INSTRUCTIONS
Manual Overview and Installer Requirements
Covers manual scope, installer knowledge, and pre-installation checks.
Warning Symbols and Usage Guidelines
Explains safety symbols and defines intended/improper use of the gate opener.
INTRODUCTION AND SPECIFICATIONS
Product Specifications and Kit Contents
Details technical specifications and lists components for MGLSK/MGLDK kits.
Installation Planning and Tools
Covers planning, wind load, wiring, earthing, and required tools.
Post Bracket Positioning
Guides on determining and mounting the post bracket for optimal gate operation.
INSTALLATION PROCEDURES
Bracket Mounting and Manual Release
Instructions for attaching gate/post brackets and operating the manual release.
Control Box and Hard Stops
Covers control box installation and hard stop adjustment.
Manual Release Operation
Details how to disengage and re-engage the manual release mechanism.
WIRING AND ELECTRICAL CONNECTIONS
Electrical Safety and Power Wiring
Crucial safety instructions for electrical connections and connecting main power.
Motor and Accessory Connections
Describes connecting motors and optional protection devices.
Wiring Diagram
Visual representation of all electrical connections for the system.
Protection Devices and Battery Backup
Details installation of safety beams, edge sensors, and optional battery backup.
PROGRAMMING AND CONFIGURATION
LCD Interface and Initial Setup
Explains the LCD screen, buttons, and mandatory initial setup procedure.
Basic Settings Configuration
Covers limit/force learning, remote behavior, IR inputs, and operational modes.
Advanced Settings and Password
Details password management, force, speed adjustments, and factory reset.
WIRELESS PROGRAMMING
Remote Control Programming
Step-by-step guide to program new remote controls and erase existing codes.
myQ Gateway Integration
Instructions for connecting and setting up the myQ gateway for smart control.
OPERATION AND MAINTENANCE
Error Code Troubleshooting
Lists common error codes, their problems, required actions, and how to clear them.
Available Accessories
Lists and illustrates various optional accessories for the gate opener system.
PROGRAMMING FLOW CHARTS
Basic Settings Flowchart
Visual guide for navigating and configuring basic settings of the gate opener.
Advanced Settings Flowchart
Visual guide for navigating and configuring advanced settings like force, speed, and password.
WARRANTY INFORMATION
Warranty Registration and Terms
Information on registering the warranty and the terms of the limited warranty.
Need help?
Do you have a question about the MGLDK and is the answer not in the manual?
Questions and answers