Related Manuals for Siemens Albatros AVS37 Series
Summarization of Contents
1 Overview
1.1 Product Range Overview
Details the product range and its series, covering basic units, extension modules, and operator units.
1.1.2 Operating Options
Illustrates wired and wireless operating configurations for room and operator units.
2 Safety Notes
2.1 Product Liability
Defines product usage limitations, installation compliance, and warranty voiding conditions.
3 Mounting and Installation
3.1 Regulations
Covers electrical installation safety and general regulations for units.
3.2 Basic Units RVS…
Details planning, mounting methods, dimensions, and drilling plans for RVS units.
3.2.1 RVS46.530 Connection Terminals
Describes connection terminals for the RVS46.530 basic unit.
3.2.2 RVS46.543 Connection Terminals
Describes connection terminals for the RVS46.543 basic unit.
3.2.3 Terminal Markings
Details terminal markings for mains and low voltage connections.
3.3 Extension Module AVS75.390
3.3.1 AVS75.390 Connection Terminals
Details connection terminals for the AVS75.390 extension module.
3.3.2 Assignment of Terminals
Explains terminal assignment based on parameters for function extension modules.
3.4 Operator Unit AVS37.294
3.4 Mounting Method and Connections
Describes installation, removal, connections, and grounding for the operator unit.
3.5 Operator Unit AVS37.390
3.5 Connections and Dimensions
Details connection to the basic unit and provides dimensional specifications.
3.6 Room Unit QAA55…
3.6 Planning, Mounting, and Connections
Covers planning, mounting methods, and connections for the QAA55 room unit.
3.7 Room Unit QAA75…
3.7 Planning, Mounting, and Connections
Covers planning, mounting methods, and terminal assignments for QAA75 units.
3.8 Wireless Components
3.8.1 Radio Module AVS71.390
Details the radio module for enabling wireless communication.
3.8.2 Room Unit QAA78.610
3.8.2 Planning and Mounting
Covers planning considerations and mounting methods for the QAA78 room unit.
3.8.2 Dimensions and Drilling Plan
Provides dimensional drawings and drilling plans for the QAA78.610 room unit.
3.8.3 Wireless Outside Sensor AVS13.399
3.8.3 Mounting Method and Connections
Illustrates mounting methods and sensor connection to the radio transmitter.
3.8.4 Radio Repeater AVS14.390
3.8.4 Mounting Method and Connections
Details mounting methods, power supply, and wiring for the radio repeater.
4 Commissioning
4.1 Basic Units
Covers commissioning steps for basic units, including prerequisites and LED checks.
5 Handling
5.1 QAA75.. / QAA78… / AVS37…
Explains operation of room and operator units QAA75/78 and AVS37.
5.1.1 Operation: Display Options & Heating Mode
Details display options, symbols, and how to select heating modes.
5.1.1 Operation: Protection, Cooling, DHW & Setpoints
Explains protection, cooling, DHW modes, and room temperature setpoint adjustment.
5.1.1 Operation: Occupancy Button & Displaying Info
Covers the occupancy button function and how to display unit information.
5.1.1 Operation: Reset, Manual Control, Functions
Explains reset, manual operation, chimney sweep, and SLT test functions.
5.1.2 Programming: Setting Principle & Time of Day
Explains parameter setting principles and how to set time of day.
5.1.3 User Levels
Describes how to access different user levels for settings.
5.1.4 Overview of Settings
Provides a comprehensive list of available settings up to the heating engineer level.
5.2 AVS37.390
5.2.1 Operation: Elements, Display, Setpoints
Identifies operating elements, display options, and setpoint adjustments.
5.2.2 Programming: Principle & Time of Day
Explains programming principles and setting time of day for AVS37.390.
5.2.2 User Levels
Describes how to access different user levels for settings on AVS37.390.
5.2.3 Overview of Settings
Lists all available settings for the AVS37.390 up to heating engineer level.
5.3 QAA55…
5.3.1 Operation: Elements, Modes, Setpoints
Identifies operating elements, display options, and modes for QAA55.
5.3.1 Operation: Continuous, Protection, Cooling Modes
Explains continuous, protection, and cooling modes for QAA55.
5.3.1 Operation: Setpoint and Occupancy
Covers room temperature setpoint adjustment and occupancy button.
5.3.2 Programming: Configuration
Explains configuration settings for programming functions like direct adjustment and lock.
6 The Settings in Detail
6.1 Time of Day and Date
Details how to set the controller's internal clock and date correctly.
6.2 Operator Section: General
Covers operator section settings like language, info, and operation/programming locks.
6.2 Operator Section: Adjustment and Usage
Explains direct adjustment modes and unit usage assignments.
6.2 Operator Section: Circuit Assignment
Details how to assign heating circuits to units and sensors.
6.3 Radio
6.3 Binding and Test Mode
Explains the process of binding wireless devices and testing communication.
6.3 List of Wireless Devices
Lists available wireless devices and their status.
6.4 Time Programs
6.4 Switching Points and Standard Program
Details setting switching points for time programs and default values.
6.5 Holidays
Explains how to set up holiday programs for heating circuits.
6.6 Heating Circuits
6.6 Operating Mode and Setpoints
Describes operating modes and setpoints for heating circuits.
6.6 Heating Curve and Adaption
Explains heating curve slope, displacement, and adaption.
6.6 ECO Functions and Limits
Covers ECO functions, summer/winter heating limits, and 24-hour limits.
6.6 Room Influence and Compensation
Explains room influence settings for temperature compensation.
6.6 Room Temp Limitation and Boost Heating
Covers room temperature limitation and boost heating functions.
6.6 Quick Setback and Optimum Start/Stop
Details quick setback, optimum start/stop control, and raising reduced setpoints.
6.6 Overtemperature Protection and Mixing Valve Control
Covers overtemperature protection and mixing valve control functions.
6.6 Floor Curing Function
Details the floor curing function for controlled floor drying.
6.6 Excess Heat Draw and Buffer Storage
Explains excess heat draw, buffer storage, and primary controller functions.
6.7 Cooling Circuit
6.7 Operating Mode, Setpoints, and Release
Describes operating modes, setpoints, and release options for cooling.
6.7 Flow Temperature Setpoint and ECO Functions
Covers flow temperature setpoint, ECO, cooling limit, and locking period.
6.7 Flow Temperature Limits and Room Influence
Details flow temperature limits and room influence settings.
6.7 Room Temperature Limitation and Mixing Valve
Explains room temperature limitation and mixing valve control.
6.7 Dewpoint Monitoring
Covers dewpoint monitoring for condensation prevention.
6.8 DHW
6.8 Setpoints and Release
Details setpoints and release options for DHW heating.
6.8 Priority and Legionella Function
Explains DHW priority settings and Legionella function.
6.8 Circulating Pump
Details circulating pump release, cycling, and setpoint settings.
6.9 Hx Pumps
6.9 Excess Heat Draw
Explains excess heat draw for Hx pumps.
6.10 Primary Controller / System Pump
Details primary controller and system pump settings.
6.11 Solar
6.11 Charging Controller and Start Function
Explains charging control, temperature differentials, and pump start functions.
6.11 Frost Protection and Over-temperature Protection
Covers collector frost protection and over-temperature protection.
6.11 Yield Measurement
Details measurement of solar energy yield and antifreeze parameters.
6.12 DHW Storage Tank
6.12 Charging Control and Overtemperature Protection
Explains charging control, temperature limits, and overtemperature protection.
6.12 Recooling and Electric Immersion Heater
Details recooling functions and electric immersion heater operation.
6.13 Instantaneous DHW Heater
6.13 Mixing Valve Control
Details actuator running time for mixing valve control.
6.14 Configuration
6.14 Heating Circuits and Cooling Circuit
Covers configuration for heating circuits and cooling circuit 1.
6.14 DHW Sensor and Control Element
Details DHW sensor and control element configurations.
6.14 Output Relay QX
Lists available functions for output relay QX1.
6.14 Input Sensor BX
Lists available functions for input sensors BX1, BX2, BX3, BX4.
6.14 Input H1 Functions
Details functions assignable to input H1.
6.14 Excess Heat Discharge and Dewpoint Monitoring
Covers excess heat discharge and dewpoint monitoring features.
6.14 Room Temperature and Contact Inputs
Details room temperature, contact type, and voltage/function value settings.
6.14 Mixing Valve Groups
Explains assignment of mixing valve groups to connections.
6.14 Extension Module Functions
Details functions for extension modules and their assignments.
6.14 Extension Module Types (QX, BX, H2)
Lists functions for QX, BX, and H2 extension modules.
6.14 Sensor Readjustment and Building Model
Covers sensor types, readjustment, and building time constant settings.
6.14 Frost Protection and External Requirements
Details plant frost protection and external requirements like dehumidifiers.
6.14 Sensor State and Parameter Reset
Details sensor state saving and parameter reset functions.
6.14 Plant Diagram Identification
Explains how to identify plant diagrams using check numbers.
6.15 LPB System
6.15 Address and Power Supply
Covers device address, segment address, and bus power supply configuration.
6.15 Bus Power Supply and Central Functions
Details bus power supply states and central function settings.
6.15 Clock Mode
Explains clock mode settings and outside temperature source.
6.16 Faults
6.16 Acknowledgements and Error History
Describes how to acknowledge faults and view stored error history.
6.17 Maintenance / Special Mode
6.17 Manual Operation and Simulations
Details manual operation, relay states, and temperature simulation.
6.18 Input / Output Test
6.18 Telephone Customer Service
Provides information for telephone customer service.
6.19 State
6.19 Messages and State Displays
Visualizes the current operating state of the plant via status displays.
6.19 State of DHW and Solar
Displays the operating states for DHW and solar systems.
6.20 Diagnostics, Heat Generation
6.21 Diagnostics, Consumers
Allows display of setpoints, actual values, and relay states for consumers.
6.22 List of Displays
6.22.1 Error Code
Lists error codes, their descriptions, and priorities.
6.22.2 Maintenance Code
Lists maintenance codes and their descriptions.
6.22.3 Special Operation Code
Lists special operation codes and their descriptions.
7 Plant Diagrams
7.1 Basic Diagrams
Provides basic plant diagrams for standard applications.
7.2 Extra Functions in General
Details extra functions selectable via configuration page.
7.2 Heating/Cooling Circuit and Heat Converter
Shows diagrams for heating/cooling circuits and heat converters.
7.3 Extra Functions with Extension Module AVS75.390
7.3 Mixing Valve Heating Circuit
Illustrates mixing valve function in a heating circuit.
7.3 Cooling Circuit Diagrams
Shows diagrams for cooling circuits (2-pipe and 4-pipe).
7.3 Solar DHW Heating
Illustrates the solar DHW heating configuration.
7.3 Primary Controller Functions
Diagrams for primary controller, DHW controller, and instantaneous heater.
8 Technical Data
8.1 Basic Units RVS…
Provides technical specifications for basic RVS units.
8.1 Interfaces, Cable Lengths, and Protection
Details interfaces, cable lengths, and protection degrees.
8.1 Directives, Standards, and Climatic Conditions
Covers directives, standards, and environmental conditions.
8.2 Extension Module AVS75.390
8.2 Interfaces and Protection
Details interfaces, protection classes, and standards for the extension module.
8.3 Operator and Room Units AVS37.., QAA7x, QAA55
8.3 Power Supply and Room Temperature Measurement
Covers power supply and room temperature measurement specs.
8.3 Interfaces and Degree of Protection
Details interfaces and degree of protection for the units.
8.3 Directives, Standards, and Climatic Conditions
Covers directives, standards, and environmental conditions.
8.4 Power Supply AVS16.290
8.4 Degree of Protection and Standards
Details protection class, degree, and product standards for the power supply.
8.5 Radio Module AVS71.390
8.5 Interfaces and Degree of Protection
Details interfaces, protection, and standards for the radio module.
8.6 Wireless Outside Sensor AVS13.399
8.6 Outside Temperature Acquisition and Weight
Covers outside temperature acquisition and weight specifications.
8.7 Radio Repeater AVS14.390
8.7 Interfaces and Degree of Protection
Details interfaces, protection, and standards for the radio repeater.
8.8 Sensor Characteristics
8.8.1 NTC 1 k Sensor Characteristics
Provides resistance values for NTC 1 k sensors at different temperatures.
8.8.2 NTC 10 k Sensor Characteristics
Provides resistance values for NTC 10 k sensors at different temperatures.
8.8.3 PT1000 Sensor Characteristics
Provides resistance values for PT1000 sensors at different temperatures.
Need help?
Do you have a question about the Albatros AVS37 Series and is the answer not in the manual?
Questions and answers