Related Manuals for Zip HydroTap G4 BCHA-A 100/75
Summarization of Contents
Important Safety Instructions
Warnings
Critical safety warnings and regulatory information for safe operation.
Section 2 Ventilation
Ventilation for All Models
Details required air gaps and conditions for proper ventilation of all models.
Critical Cupboard Air Circulation
Instructions for installing vents when cupboard air circulation is insufficient.
Section 3 Booster Heater
Booster Heater Product Description
Overview of the booster unit, its purpose, and compatibility with HydroTap models.
Booster Installation Procedure
Steps and site requirements for installing the booster heater unit.
Booster Appliance Removal and Installation
Detailed steps for safely removing and installing the booster heater appliance.
Braided Hose Connections
Instructions for connecting the braided hoses to the booster unit and HydroTap.
Section 4 Command Centre Installation
External Bypass Valve
How to set the bypass valve based on external filter usage.
Hose and Tube Fitting
Guidelines for fitting hoses and tubes, including insulation and connector types.
John Guest Fittings Procedure
Step-by-step guide for inserting and removing tubes from John Guest fittings.
BC100/75 Model Installation
Specific installation diagram and notes for the BC100/75 model.
All-In-One Mains Pressure Model
Installation diagram and notes for the All-In-One Mains Pressure model.
All-In-One Vented Model
Installation diagram and notes for the All-In-One Vented model.
4-In-One Vented Model
Installation diagram and notes for the 4-In-One Vented model.
Section 5 Commissioning
Select Language
How to choose the display language for the HydroTap unit.
Filter Flush Procedure
Steps to flush the new filter cartridge to prepare it for use.
Boiling Calibration
Procedure to calibrate the boiling water temperature and steam vent.
Booster Configuration
Steps to enable and configure the booster heater if installed.
Safety Sensor Calibration
Instructions for recalibrating the safety sensor for lever taps.
Command-Centre Flush
Procedure to flush the system with fresh water after sanitisation.
Need help?
Do you have a question about the HydroTap G4 BCHA-A 100/75 and is the answer not in the manual?
Questions and answers