Unpacking And Placement; Unpacking Your Amplifier; Placement; Ventilation - Classe Audio CT-M300 - V1.2 Owner's Manual

unpacking your amplifier Carefully unpack your power amplifi er according to the supplied instructions,
Important!
placement Most installations will likely utilize an equipment rack, although a shelf, a
ventilation Your Classé power amplifi er generates a certain amount of heat in the course
custom installations Drawings are included in this manual to facilitate special installations and
serial number Th e serial number for your power amplifi er is found on the rear of the unit.
6

Unpacking and Placement

and remove all accessories from the carton. Please take care when lifting the
amplifi er, as it is quite heavy.
Keep all packing materials for future transport of your
Classé product. Shipping your new component in anything
other than its purpose-designed packing material may
result in damage that is not covered by the warranty.
traditional cabinet or the fl oor near the speaker(s) are acceptable alternatives. In
any case, take care to position it well away from source components and preamp/
processors, which may be sensitive to the amplifi er's electromagnetic fi elds.
Note that adequate clearance for the AC cord and connecting cables
must be left behind the amplifi er. We suggest leaving six inches (15 cm)
of free space behind your power amplifi er to allow all cables suffi cient
room to bend without crimping or undue strain.
of normal operation. Th e vents on both the bottom and the top of the
amplifi er must be kept free from any obstruction which would reduce the fl ow
of air through the unit. Avoid placement on soft surfaces that would restrict
airfl ow (such as plush carpeting).
custom cabinetry (see the section Dimensions). A purpose-designed rack
mount kit is included with this product. Contact your Classé dealer for more
information.
Please note and record this number on the page entitled Important Safety
Instructions for your future reference.