Table of Contents
Advertisement
26
Care and Maintenance
To remove dust from the cabinet of your amplifi er, use a feather duster or a lint-
free soft cloth. To remove dirt and fi ngerprints, we recommend isopropyl alcohol
and a soft cloth. Dampen the cloth with alcohol fi rst and then lightly clean the
surface of the amplifi er with the cloth. Do not use excessive amounts of alcohol
that might drip off the cloth and into the amplifi er.
Caution!
At no time should liquid cleaners be applied directly to
the amplifier, as direct application of liquids may result
in damage to electronic components within the unit.
From time to time, the air intake fi lter behind the front panel will need to be
vacuum cleaned or removed and rinsed with clean fresh water. A pressure sensor
measures the airfl ow to determine when it is necessary to clean the fi lter. When
cleaning is required, the Standby button will fl ash red/blue and a message will
be sent to connected touchscreen controlled devices via the connected CAN-Bus
system.
Advertisement
Table of Contents
