Repeat Play; Random Play); Scanning Programmes; Controlling Cd Changer (Optional) (Cdm-7857Rb Only) - Alpine CDE-7853R Owner's Manual

CD Player Operation
- / J

Repeat Play

1
Press the RPT button to play back repeatedly the
track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the RPT button again to deactivate the
repeat play.
NOTE
If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the
disc selected.
→ →
RPT RPT ALL
NOTE
In case a 6-disc CD changer is connected (CDM-
7857RB only):
Press the F button to change to green, then go to step 1.
Press the F button to return to the normal mode.
The F button returns to red.
M.I.X. (Random Play)
1
Press the M.I.X. button in the play or pause mode.
The M.I.X. indicator will illuminate and the
tracks on the disc will be played back in a
random sequence. After all the tracks on the
disc have been played back once, the player
will begin a new random sequence play until the
M.I.X. mode is cancelled.
To cancel M.I.X. play, press the M.I.X. button again.
NOTE
In case a 6-disc CD changer is connected
(CDM-7857RB only):
Press the F button to change to green, then go to step 1.
Press the F button to return to the normal mode.
The F button returns to red.
12
-EN
SOURCE
→
OFF
F
M.I.X.
RPT

Scanning Programmes

1
Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button to
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected (CDM-
7857RB only):
Press the F button to change to green, then go to step 1.
Press the F button to return to the normal mode.
The F button returns to red.
Controlling CD Changer (Optional)
(CDM-7857RB only)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-7857RB, you can control the CD
Changer using the CDM-7857RB.
NOTE
The CD controls on the CDM-7857RB for the CD
Changer operation are functional only when the CD
Changer is interconnected with the CDM-7857RB.
1
Press the SOURCE button to activate the CD
Changer.
The display shows "Shuttle", the disc number
and track number.
NOTE
To start play or pause play, press the :/J button.
2
Make sure that the F button lights red, then
press the Preset buttons to select the desired
disc loaded in the CD Changer.
Preset (1 through 6)
SCAN