Related Manuals for Bomag BPR 25/40
Summarization of Contents
Foreword
Please fill in
Instructions for filling in machine details upon receipt.
Technical Data
Dimensions and Specifications
Physical dimensions, weight, and engine specifications for the vibratory plate compactor.
Weights
Details on the weight of the machine and its operating weight.
Vibration System and Filling Capacities
Specifications for the vibration system and fluid capacities of the machine.
Noise and Vibration Values
Measured noise levels, sound pressure, and hand-arm vibration values according to regulations.
Safety Regulations
General Safety and Intended Use
General safety rules, intended use, and precautions for safe operation.
Machine Operation and Operator Safety
Procedures for starting, parking, fueling, and safe operation of the machine.
Cleaning, Repair, and Welding Safety
Safety guidelines for cleaning, repairs, and welding on the machine.
Operation
General Operation and Pre-Checks
Basic operational notes and essential checks before starting the machine.
Starting and Steering Procedures
Instructions for folding the steering rod and starting the engine.
Work Operation and Stuck Machine Handling
Guidance on operating the plate compactor and procedures for freeing a stuck machine.
Stopping and Loading Procedures
Steps for safely stopping the engine and loading the machine onto transport.
Maintenance
4.1 General maintenance notes and fuel system
General rules for maintenance, fuel system care, and engine performance notes.
4.2 Fuels, lubricants and filling capacities
Details on recommended fuels, lubricants, and their required filling quantities.
4.4 Running-in instructions
Specific maintenance tasks for the machine's running-in period.
4.5 Maintenance table
A table detailing maintenance tasks at different intervals.
4.6 Cleaning the machine
Procedure for cleaning the machine's exterior and components.
4.7 Checking the engine oil level
How to check and maintain the correct engine oil level.
4.8 Checking the fuel level
Steps for safely checking and refueling the machine.
4.9 Checking/cleaning the air filter
Instructions for inspecting, cleaning, or replacing the air filter.
4.10 Cleaning cooling fins and air intake
Procedure for cleaning engine cooling fins and air intake openings.
4.11 Checking oil level in vibrator shaft housing
How to check and maintain the oil level in the vibrator shaft housing.
4.12 Changing the engine oil
Step-by-step guide for draining and refilling the engine oil.
4.13 Cleaning, checking the spark plug
How to clean, inspect, and adjust the spark plug for optimal performance.
4.14 Cleaning the fuel sludge filter
Procedure for cleaning the fuel sludge filter to ensure fuel system cleanliness.
4.15 Checking, tensioning, changing the V-belt
Instructions for V-belt inspection, tension adjustment, and replacement.
4.16 Cleaning/changing the air filter
Procedures for cleaning or replacing the air filter as part of annual maintenance.
4.17 Checking, adjusting the valve clearance
How to check and adjust the engine valve clearance for proper operation.
4.18 Cleaning the fuel screen
Steps for cleaning the fuel screen to prevent blockages.
4.19 Changing the oil in the vibrator shaft housing
Procedure for changing the oil in the vibrator shaft housing.
4.20 Checking the rubber buffers
Inspection of rubber buffers for damage and proper fit.
4.21 Tightening torques for screws
Recommended torque values for tightening metric unified thread screws.
4.22 Tightening bolted connections
Procedure for checking and tightening all bolted connections.
4.23 Engine conservation
Steps for conserving the engine during periods of long-term storage.
Trouble Shooting
General Troubleshooting Advice
General guidance on diagnosing and rectifying machine malfunctions.
Engine Problem Solutions
A table listing common engine problems, their possible causes, and recommended remedies.
Need help?
Do you have a question about the BPR 25/40 and is the answer not in the manual?
Questions and answers