Xerox XDM2525D-WU - DocuMate 252 User Manual page 68

DocuMate 252 Scanner User's Guide
To Scan Using Configure Before Scan
1. Put the documents in the scanner's ADF tray or on the flatbed
glass.
2. Click on the button you set to use the Configure Before Scan
option.
In the example shown on the previous page, the scanning
option 9 has been set to use Configure Before Scan.
3. The TWAIN interface will open.
4. Choose the Options applicable to your scan batch.
5. Click on the Scan button in the TWAIN interface.
6. Your documents will be scanned and sent to the Destination
Application specified in the One Touch 4.0 Properties.
In the example shown on the previous page, the Destination
Application is Microsoft Paint.
The TWAIN interface lists the scanning options available with your
Xerox DocuMate 252 scanner. Please see "Scanning with the
TWAIN Interface from PaperPort" on page 80.
Scanning
63