Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Xtralis VEP-A00-1P
Summarization of Contents
VESDA-E System Design
Sampling Pipe Configuration in Small Ducts
Details on configuring sampling pipes for small ventilation ducts (width < 1m).
Sampling Pipe Configuration in Large Ducts
Guidance on sampling pipe setup for large ventilation ducts (width 1-2m).
Key Design Considerations
Essential design points for VESDA-E VEP-1P and VEA in duct applications.
VESDA-E System Installation
Environmental Conditions
Environmental factors and conditions to consider during VESDA-E installation in ducts.
Key Installation Considerations
Key factors to consider for successful VESDA-E system installation in ventilation ducts.
VESDA-E System Commissioning
Hole Orientation Adjustment
Procedures for adjusting sampling pipe hole orientation for optimal VESDA-E performance.
System Performance Verification
Steps to verify the operational performance of the VESDA-E system after installation.
System Maintenance
Local Codes & Standards
Requirement to adhere to local codes and standards for system maintenance.
First Year Requirements
Maintenance and verification tasks required during the first year of system operation.
On-Board Filter Replacement
Guidance on replacing the smoke detector's on-board filter when indicated.
Site Visit Requirements
Procedures to be carried out during site visits for system inspection and maintenance.
Need help?
Do you have a question about the VEP-A00-1P and is the answer not in the manual?
Questions and answers