Table of Contents
Advertisement
Installation Instructions
Original Instructions
Stratix 5800 Ethernet Managed Switches
Catalog Numbers 1783-MMS10 Series A, 1783-MMS10E Series A, 1783-MMS10B Series A, 1783-MMS10BE Series A,
1783-MMS10R Series A, 1783-MMS10ER Series A, 1783-MMS10 Series B, 1783-MMS10E Series B, 1783-MMS10B Series B,
1783-MMS10BE Series B, 1783-MMS10R Series B, 1783-MMS10ER Series B, 1783-MMS10EA Series B, 1783-MMS10EAR Series B,
1783-MMX8T Series A, 1783-MMX8E Series A, 1783-MMX8EA Series A, 1783-MMX8S Series A, 1783-MMX8SA Series A,
1783-MMX6T2S Series A, 1783-MMX16T Series A, 1783-MMX16E Series A, 1783-MMX14T2S Series A
Topic
Page
5
6
6
7
8
8
9
10
11
12
12
13
14
14
14
14
15
16
Advertisement
Table of Contents
Related Manuals for Allen-Bradley 1783-MMS10R
Summarization of Contents
Environment and Safety Precautions
Environment and Enclosure
Details on operating environment, pollution degree, and enclosure requirements for the switches.
Prevent Electrostatic Discharge
Guidelines to prevent damage from static electricity when handling the equipment.
Hazardous Location Approvals
European Hazardous Location Approval
Information on approvals for use in hazardous locations in Europe.
North American Hazardous Location Approval
Information on approvals for use in hazardous locations in North America.
Installation Preparation
Required Tools
List of necessary tools for installing the Stratix 5800 switches.
Site Requirements
Environmental and physical requirements for switch installation.
Hardware Installation
Connect an Expansion Module
Procedure for connecting an optional expansion module to the switch.
Mount the Switch on a DIN Rail
Steps for securely mounting the switch onto a DIN rail.
Ground the Switch and Expansion Module
Instructions for properly grounding the switch and any connected expansion modules.
Wiring and Connections
Wire the DC Power Source
Detailed steps for connecting the DC power supply to the switch.
Install the Power Connectors on the Switch
Procedure for installing the power connectors onto the switch.
Wire External Alarms
How to connect external alarm devices to the switch's alarm circuits.
Install the Alarm Relay Connector on the Switch
Guide for connecting the alarm relay connector to the switch.
Module Installation and Configuration
Install or Remove and SFP Module
Instructions for installing and removing SFP modules for fiber connectivity.
Install or Remove the SD Card
Steps for installing and removing the SD card for firmware/configuration backup.
Connectivity and Operation
Connect to 10/100/1000 Ports
How to connect devices using standard Ethernet ports.
Connect to SFP Modules
Steps for connecting fiber-optic cables to installed SFP modules.
Confirm Installation
Procedure to verify the switch is installed and powered up correctly.
Maintenance and Specifications
Remove the Switch from the DIN Rail
Instructions for safely removing the switch from its DIN rail mounting.
Specifications
Detailed technical specifications for Stratix 5800 switches.
Resources and Support
Additional Resources
List of related Rockwell Automation documentation and resources.
Rockwell Automation Support
Information on how to access technical support and literature.
Need help?
Do you have a question about the 1783-MMS10R and is the answer not in the manual?
Questions and answers