Related Manuals for Steris Reliance 500
Summarization of Contents
Introduction from STERIS Corporation
Manual Overview and Safety Advisory
Introduces the manual's purpose, highlights safety, and provides advisory notes.
Compliance and Standards
Certifications and Standards Compliance
Lists UL, CSA, and CE mark certifications and directives.
Safety Precautions
Personal Injury and Equipment Damage Hazards
Details risks associated with operation, door movement, and maintenance.
Electric Shock and Burn Hazards
Outlines electrical safety, bonding, and burn risks from hot surfaces.
Fire, Chemical, and Slipping Hazards
Addresses fire risks, chemical handling, and slip prevention.
Equipment Damage Cautions
Highlights potential damage from incorrect accessory use and cleaning methods.
Installation Verification
Technical Specifications and Environmental Conditions
Lists electrical, environmental, and seismic requirements for installation.
Installation Checklist Items
A checklist for verifying proper installation of utilities and components.
Detergents and Chemical Additives Specifications
Specifies requirements for cleaning agents and provides product recommendations.
Component Identification
Overview of Washer Components
Identifies major external components of the Reliance 400 and 500 models.
Control Panel and Printer Locations
Details the placement and function of power, standby, and printer controls.
Load Side Control Panel Functions
Explains display screen and touch pad operations for cycle selection and control.
Unload Side Control Panel
Describes the unload side control panel, noting its similarity to the load side.
Operating Instructions
Pre-Operation Checks and Priming Procedures
Steps before starting a cycle, including power and supply checks and pump priming.
Washer Accessories and Loading Guidelines
Describes accessories and correct placement of glassware within the chamber.
Universal Shelving System Configuration
Instructions for configuring shelving for different load sizes on Reliance 400/500.
Cycle Operation, Extension, and Alarm Handling
Steps for running cycles, extending treatments, and responding to alarms.
Stopping, Aborting, and Door Operation Safety
Procedures for halting cycles, managing doors, and power failures.
Cycle and Control Value Programming
General Cycle Information and Mode Navigation
Overview of cycles and navigating the Change Values mode.
Modifying, Adding, and Creating Cycles
Procedures for altering existing cycles or programming new ones.
Removing Treatments and Changing Miscellaneous Values
How to delete treatments and adjust miscellaneous operating parameters.
Injection Time, Concentration, and Access Codes
Setting injection time, verifying concentration, and managing access codes.
Reviewing Cycle Values and Generating Printouts
How to view current settings and generate printouts for selected cycles.
Routine Maintenance Procedures
General Maintenance and Preventive Schedule
Overview of maintenance frequency and the detailed preventive maintenance guide.
Daily, Weekly, and Monthly Cleaning Tasks
Instructions for routine cleaning of different components and areas.
Chemical Container and Supply Line Strainer Maintenance
Procedures for replacing chemical containers and cleaning supply line strainers.
Pump Squeeze Tube and Power Door Checks
Maintenance for pump tubes and verification of power door function.
Printer Paper Roll Replacement and Storage
Steps for changing the printer paper roll and advice on storing thermal paper.
Troubleshooting Washer Malfunctions
Problems Without Alarms or Printouts
Solutions for issues like no interior light, display lockouts, or non-starting cycles.
Troubleshooting Common Alarms and Printouts
Addresses issues related to alarms, printouts, and specific error messages.
Need help?
Do you have a question about the Reliance 500 and is the answer not in the manual?
Questions and answers