DN-300Z Remote Control
1. Source: Press this button to cycle through CD, USB, SD, Aux, or
Bluetooth modes. See
more information.
2. FM/AM: Press this button to switch between FM and AM modes. See
Operation > Selecting Media Playback Mode
3. Folder/All Button: In USB or SD Mode, press this button to switch
between Folder View and All View. See
for more information.
4. Eject Button: Press this to eject the CD in the CD Slot.
5. Time Button: In CD, USB, or SD Mode, press this button to switch the
Time Mode in the display. See
Playing Audio Files
6. Enter Button: Press this button to confirm a selection.
7. Number Buttons (0–9): In CD Mode, Press one of these buttons to
directly select a track to play. If the track number is two digits, press the
buttons in succession (e.g., 1 then 2 for Track 12). See
Playing Audio CDs
In FM/AM Mode, press one of these buttons to directly select a station stored to preset number. If the preset
number is two digits, press the buttons in succession (e.g., 1 then 2 for Preset 12). See
Radio
for more information.
Cursor Buttons: When in CD, USB, or SD Mode, use these buttons to navigate through the files and folders.
See
Operation > Playing Audio Files
8. Repeat Button: In CD, USB, or SD Mode, press this button to switch between Repeat Playback modes: Repeat
One, Repeat All, and Repeat Off. See
information.
Power-On Play Button: Press and hold this button to turn Power-On Play on or off. See
Functions > Power-On Play
9. Auto Mute Button: In FM/AM Mode, press this button to turn Auto Mute on or off. See
Radio
for more information.
10. Random Button: In CD Mode, press this button to cycle through Normal Play Mode, Single Play Mode, and
Random Play Mode. In USB or SD Mode, press this button to turn Random Play Mode on or off. See
> Playing Audio CDs
Pairing Button: In Bluetooth Mode, press and hold this button to let the unit pair to a nearby Bluetooth device.
See
Operation > Playing Audio from a Bluetooth Device
11. Skip Buttons: In CD, USB, or SD Mode, press one of these buttons to move to the previous or next track. See
Operation > Playing Audio CDs
In FM/AM Mode, press one of these buttons to select the previous or next station stored to preset number. See
Operation > Using the Radio
In Bluetooth Mode with a device compatible with AVRCP, press one of these buttons to select the previous or
next track.
12. Search Buttons: In CD, USB, or SD Mode, press and hold one of these buttons to rewind/fast-forward. Initially,
the track will rewind/fast-forward at 5 times the normal playback speed. After holding the button for more than 1
second, the track will rewind/fast-forward at 30 times the normal playback speed.
In Bluetooth Mode with a device compatible with AVRCP, press and hold one of these buttons to rewind/fast-
forward.
Tuning Buttons: In FM/AM Mode, press one of these buttons to increase or decrease the frequency one step at
a time. Press and hold the button for more than 1 second to jump to the previous or next station with clear
reception.
13. Play/Pause Button: Press this button to start, resume, or pause playback.
14. Stop Button: Press this button to stop playback.
Operation > Selecting Media Playback Mode
Operation > Playing Audio Files
Operation > Playing Audio CDs
for more information.
for more information.
for more information.
Operation > Playing Audio CDs
for more information.
or
Playing Audio Files
or
Playing Audio Files
for more information.
for more information.
Operation >
for more information.
for more information.
for more information.
for
8
9
12
15
16
or
2 3
1
Operation > Using the
or
Playing Audio Files
Operation > Additional
Operation > Using the
4
5
6
7
10
11
13
14
13
17
for more
Operation
Need help?
Do you have a question about the DN-300Z and is the answer not in the manual?
Questions and answers