Related Manuals for Pentair QUAD 80
Summarization of Contents
Important Warning and Safety Instructions
General Safety Notices
General advisories for installers and users regarding safe operation and maintenance.
High Pressure Operation Hazards
Warns about dangers of pressurized air and potential lid separation during servicing.
Electrical Shock and Electrocution Risk
Details risks associated with electrical components, water, and proper servicing procedures.
Pool and Spa Application Compliance
Emphasizes adherence to local codes and regulations for pool and spa installations.
Hazardous Pressure During Startup
Outlines risks of air entrapment and pressurization during initial system startup.
General Installation Safety
Covers safe practices for electrical controls, wiring, grounding, and bonding.
Introduction
Filter Overview
Describes the Quad D.E. filter, its design, and key benefits for pool water clarity.
Maintaining the Pressure Gauge
Explains the importance of the pressure gauge and criteria for its maintenance or replacement.
Pressure Tests
Provides critical safety warnings and guidelines for performing hydrostatic pressure tests.
Installation
Location Requirements
Specifies requirements for filter placement, including level surfaces and clearances.
Plumbing Connections
Details plumbing procedures, use of lubricants, and lists required Pentair accessories.
Operation
General Filter Operation
Covers safe operation principles, pressure limits, and the necessity of diatomaceous earth.
Clamp Installation
Clamp Installation Procedure
Step-by-step guide for securely installing the filter clamp to prevent lid separation.
System Restart
System Restart Instructions
Procedure for safely restarting the filter system after servicing or maintenance.
Preparing Diatomite
Explains how to prepare and use Diatomaceous Earth (D.E.) for filter precoating.
Coating Filter Elements with D.E.
Using Slide Valve
Procedure for introducing D.E. slurry into the filter using a slide valve.
Using Multi-port Valve
Procedure for introducing D.E. slurry into the filter using a multiport valve.
Maintenance
Manually Cleaning the Filter
Instructions for manually cleaning filter elements and tank components.
Replacing Filter Elements
Cleaning Filter via Separation Tank System
Steps for cleaning the filter using a separation tank, including valve procedures.
Slide Valve Procedure
Specific steps for cleaning using a separation tank with a slide valve.
Acid Soaking Filter Elements
Multiport Rotary Valve Procedure
Specific steps for cleaning using a separation tank with a multiport valve.
How to Acid Soak Filter Elements
Detailed instructions for safely soaking filter elements in an acid solution to remove mineral buildup.
Cleaning Manual Air Relief Valve
Cleaning Internal Air Bleed Tube
Instructions for inspecting and cleaning the internal air bleed tube and screen cap.
Troubleshooting
Air Entering the Filter
Identifies common causes of air in the filtration system and their corrective actions.
Liming-Up Issues
Addresses filter fabric stiffness due to mineral deposits and cleaning solutions.
Cloud of Dirt
Explains the characteristic of transient dirt clouds appearing after filter startup.
Pressure Drops on Gauge
Diagnoses and resolves issues related to sudden pressure drops indicated on the gauge.
Pressure Remains High After Backwash
Troubleshooting steps for persistent high pressure readings after performing a backwash.
Pressure Gauge Maintenance
Guidelines for checking and maintaining the pressure gauge's accuracy and readability.
Diatomite Entering Pool
Steps to inspect elements and ensure proper seating to prevent D.E. from entering the pool.
Technical Data
Head Loss Curves
Graphical representation of filter pressure loss in relation to filter flow rate.
Flow Rates
Table detailing recommended flow rates and turnover capacities for different filter models.
Need help?
Do you have a question about the QUAD 80 and is the answer not in the manual?
Questions and answers