Refrigerator Safety; Installation Requirements - Kenmore 4542 - Elite 23.1 cu. Ft. Refrigerator Installation Instructions Manual

Counter depth side by side refrigerator
Table of Contents

Advertisement

Available languages

Available languages

REFRIGERATOR SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured
if you don't immediately
follow instructions,
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
INSTALLATION REQUIREMENTS
PARTS NEEDED:
IMPORTANT:
Observe all governing codes and ordinances.
Installer: Leave Installation Instructions with homeowner.
Homeowner:
Keep Installation Instructions for future
reference and for the local electrical inspector's
use.
Keep cardboard shipping piece or plywood under refrigerator
until it is installed in the operating position.
Comply with installation specifications
and dimensions.
Remove any moldings or decorative panels from kitchen
cabinets that prevent the refrigerator from being serviced.
Contact a qualified electrical installer.
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Hand drill or electric drill
7/_e" a nd 1_.,, o pen-end
(properly grounded)
wrenches
V4" nut driver and
Two adjustable wrenches
drill bit
Flat-blade screwdriver
Socket wrench
5/16"or adjustable wrench
Your refrigerator dealer has a kit available with a V4" (6.35 mm)
saddle-type
shutoff valve, a union, and copper tubing.
Or you can purchase a 1/4"(6.35 mm) copper tubing with
shutoff valve and a V4" (6.35 mm) compression
fitting
(coupling).
Depending on water line connections, you may also need a
1/4" (6.35 mm) nut and 1/4"(6.35 mm) ferrule.
Top View
3/8"
(65.3 mm)
355/8"
(606om>
(66.7 cm)
301/8"
(76.4 cm) max.
__ullu
_
"
(36.6 cm)
_49.5
cm)
I
X
...... _ A
2%"
(6.7 cm) max.
A. Dimensions
may vary based on the model
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

4542 23.1

Table of Contents