Related Manuals for Pro-face AGP3301-S1-D24
Summarization of Contents
Preface and Safety Information
Preface
Introduction to the replacement guidebook.
Safety Information
Crucial safety precautions for operating the equipment.
Hazard of Operator Injury
Details potential risks and necessary precautions for safe operation.
Chapter 1 Specification Comparison
GP-3301S/L vs GP-4301TM Specifications
Compares technical specifications of GP-3301S/L and GP-4301TM units.
GP-3302B vs GP-4301TM Specifications
Compares technical specifications of GP-3302B and GP-4301TM units.
ST-3301S/B vs GP-4301TM Specifications
Compares technical specifications of ST-3301S/B and GP-4301TM units.
Chapter 2 Compatibility of Hardware
Connector Locations
Illustrates the physical location of connectors on different unit models.
Touch Panel and Display Characteristics
Details touch panel type and color display differences.
Panel Cutout Dimensions
Provides the physical dimensions required for panel mounting.
External Dimensions and Transfer Cable
Covers unit dimensions and requirements for data transfer cables.
Serial and CF Card Interfaces
Details serial port configurations and CF card slot alternatives.
Peripheral and Option Unit Compatibility
Explains compatibility with barcode readers, printers, and expansion units.
Barcode Reader Connection
Details connecting barcode readers via USB.
Printer Connection Support
States that printer connection is not supported.
Expansion Unit Support
Notes the absence of an expansion bus unit.
Isolation Unit Compatibility
Mentions that specific isolation units are not compatible.
Power Consumption and Materials
Compares power usage and lists unit materials and colors.
Backup Memory Handling
Explains how backup memory is handled in the new unit.
Pro-Server EX and Other Notes
Covers Pro-Server EX version and general usage guidelines.
Chapter 3 Replacement Procedure
Overall Work Flow
Outlines the step-by-step process for unit replacement.
Preparation for Data Transfer
Details the requirements for receiving and converting screen data.
Receiving Screen Data from GP/ST3000
Guides on how to extract data from the old GP/ST3000 unit.
Changing Display Unit Type in Project
Explains how to set the new unit type in the project file.
Transferring Project Data to GP-4301TM
Details the process of sending the project file to the new unit.
Software Function Differences
Lists functions deleted due to incompatibility with the new unit.
Chapter 4 Communication with Device/PLC
Connectable Drivers Overview
Information on available drivers for device and PLC communication.
COM Port Connector Shapes
Visual comparison of COM port connectors across different models.
COM1 Signal Differences
Highlights differences in COM1 signal configurations.
COM2 Signal Differences
Details differences in COM2 signal configurations.
Multilink Connection Setup
Information on setting up serial multi-link communication.
Cable Diagram for Replacement
Illustrates connection diagrams for the replacement process.
Chapter 5 Appendix: Troubleshooting
Display Unit Type Change Errors
Addresses common error messages and solutions when changing unit types.
Need help?
Do you have a question about the AGP3301-S1-D24 and is the answer not in the manual?
Questions and answers