Related Manuals for Lenze POWERLINK E84DGDV Series
Summarization of Contents
About this documentation
Document history
Records changes made to the documentation over time.
Conventions used
Explains the symbols, formatting, and terminology used in the manual.
Terminology used
Defines key terms and abbreviations related to POWERLINK and the Inverter Drive.
Notes used
Details the meaning of signal words and pictograms for safety and application notes.
Safety instructions
General safety and application notes
Provides essential safety guidelines and application-specific precautions for Lenze components.
Device and application-specific safety instructions
Outlines specific safety measures for the Communication Unit and its integration.
Residual hazards
Highlights potential dangers like electrostatic discharge affecting electronic components.
Product description
Application as directed
Specifies the intended use of the POWERLINK communication unit with specific modules.
Features and variants
Details the different versions of the POWERLINK Communication Unit and their capabilities.
Connections and interfaces
Illustrates and describes the physical connectors and interfaces on the Communication Unit.
Technical data
General data and operating conditions
Lists general specifications, communication profiles, and operating parameters.
POWERLINK communication data
Provides detailed communication parameters like cycle times, buffer sizes, and delays.
Installation
Mechanical installation
Describes the physical mounting procedures for the Inverter Drive and Communication Unit.
Network topology
Explains the recommended network configurations for POWERLINK systems.
POWERLINK
Details the specific requirements and considerations for using POWERLINK in the network.
Basic Ethernet Mode
Describes an alternative mode of operation that does not support real-time communication.
POWERLINK connection
Provides pinouts and wiring details for establishing POWERLINK connections.
External voltage supply
Explains the use and connection of an external voltage supply for commissioning and backup.
Commissioning
Before initial switch-on
Details pre-operation checks and safety precautions before powering up the device.
Node address (node ID) setting
Explains how to configure the unique network address for each POWERLINK node.
Initial switch-on
Guides through the process of establishing communication and initial system startup.
Settings in the »Engineer«
Describes how to configure POWERLINK parameters using the Lenze Engineer software.
Settings in the »EASY Starter«
Details POWERLINK parameter configuration using the Lenze EASY Starter software.
Optimisation of networks
Offers advice on tuning network performance and parameters for optimal operation.
Process data transfer
Freely configuring the port interconnection of the process data objects (PDO)
Explains how to customize data exchange between nodes using PDO mapping.
Monitoring
Interruption of POWERLINK communication
Describes how communication interruptions are detected and handled by the system.
Interruption of internal communication
Covers errors occurring between the Communication Unit and the Drive Unit.
Diagnostics
LED status displays
Explains the meaning of the status LEDs on the Communication Unit for fault diagnosis.
Diagnostic data
Details the format and retrieval of diagnostic information for troubleshooting.
Error messages
Short overview of the POWERLINK error messages
Provides a quick reference table of POWERLINK error codes and their basic responses.
Possible causes and remedies
Offers detailed explanations of error causes and step-by-step solutions for common issues.
Parameter reference
Communication-relevant parameters of the operating system
Lists parameters affecting the inverter's communication functions.
Parameters relevant for POWERLINK communication
Details specific parameters for configuring the POWERLINK interface.
Table of attributes
Explains the meaning of attributes used in parameter tables, like data type and access rights.
Need help?
Do you have a question about the POWERLINK E84DGDV Series and is the answer not in the manual?
Questions and answers