Related Manuals for D&H SD10A
Summarization of Contents
Introduction, Safety, and Support
Safety Instructions
Safety guidelines for product usage and age appropriateness.
Sounddecoder Models and Pinouts
SD05A Pinout and Description
Description of pin functions for SD05A.
Sounddecoder Specifications
Dimensions and Driving Characteristics
Physical dimensions and performance metrics for driving operation.
Sounddecoder Installation
Installation Preparation
Pre-installation checks and locomotive readiness.
Installation Variants and Wiring
Interface Connections (PluX, Next18, NEM)
Connecting via PluX, Next18, NEM 651/652 interfaces.
SelecTRIX 1 (SX1) Operation
SX1 Supported Functions
Overview of functions supported under SX1 operation.
SX1 Operation via SX2 Parameters
SX1 to SX2 Parameter Mapping
Mapping SX1 programming settings to SX2 parameters.
Decoder Operation and Brake Sections
Decoder Operation Steps
Steps for programming and operating the decoder.
DCC Operating System
DCC Functions Overview
List of functions and capabilities in DCC mode.
MM Settings and Analog Modes
MM Settings (CV 12)
Settings for Märklin-Motorola (MM) operation.
Consist and Brake Settings
Brake and Feedback Settings
Configuration options for brake and feedback.
Configuration Register (CV 29)
Function Mapping F0-F10
Mapping for functions F0 through F10.
Function Mapping and Motor Control
Motor Control Settings
Settings for motor control proportional and integral.
Motor Control and Brake Settings
Brake, Shunting, and Function Switch-off
Settings for brakes, shunting, and switching off functions.
Function Switch-off and Timers
Timers for AUX Switch-off
Configuration for timers to switch off AUX outputs.
AUX6 Settings, Timers, and Special Features
Special Settings and Feedback
Settings for asymmetry, feedback, and speed.
Driving Timers and Speed Steps
Driving Timers (Up, Wait, Away)
Timers for driving up, waiting, and driving away.
General Settings and Light Conditions
LV Function Conditions
Conditions for controlling the LV (low beam light) function.
Conditions for LR and AUX Outputs
Brake Ramps and Initial Mapping
Settings for brake ramps and initial function mapping.
ZIMO HLU Compatibility and Identification
Decoder and Manufacturer Identification
Information for identifying the decoder and manufacturer.
Brake Button Mapping and Function Interchange
Brake Button Function Mapping
Mapping for the brake button function.
Function Interchange F4-F12
Effect and Parameter for AUX3/AUX4
Settings for effect and parameter of AUX3 and AUX4.
Effect and Parameter for AUX5/AUX6
Effect and Parameter for AUX5/AUX6
Settings for effect and parameter of AUX5 and AUX6.
Sound Operation CVs: Function Mapping
Driving and Secondary Sound Mapping
Mapping for driving and secondary driving sounds.
Sound Operation CVs: Volume Control
Total Volume and Driving Sound Volume
Settings for total volume and driving sound volume.
Sound Operation CVs: Coasting, Chuffs, and Brake Squeal
Coasting, Chuffs, and Brake Squeal Settings
Settings for coasting delay, chuffs, and brake squeal.
Sound Operation CVs: Modulation and Brake Squeal
Brake Squeal Settings
Settings for brake squeal at final, deceleration, and minimum delay.
Sound Operation CVs: Random Sounds and Volume Control
Random Sounds and Volume Control
Settings for random sounds, volume, and turbo sound.
Function Assignments for Idle and Acceleration
Automatic Idle and Forced Acceleration Assignment
Assignments for automatic idle and forced acceleration.
Märklin-Motorola (MM) Operation
MM Functions Overview
Overview of functions supported under MM operation.
Programming with Märklin 6020/6021
Entering Programming Mode
Steps to enter and confirm programming mode.
MM Programming Modes Explained
Short Mode Programming
Procedure for programming in short mode.
SelecTRIX 2 (SX2) Operation
SX2 Functions Overview
Overview of functions supported under SX2 operation.
Supported Parameters for SX2 Operation
Address and Locomotive Output Parameters
Parameters for address unit, hundreds digit, and locomotive output.
SX2 Parameters: Speed and Brake Settings
Acceleration, Deceleration, and Speed Parameters
Parameters for acceleration, deceleration, and maximum speed.
SX2 Parameters: Function Switch-off and Analog Modes
Analog Mode Parameter Mapping
Parameter mapping for analog modes F1-F8 and F0, F9-F12.
SX2 Parameters: Motor Control and Characteristics
Motor Frequency and Control Parameters
Parameters for motor frequency and control.
SX2 Parameters: Timers and Dimming
Dimming Parameters for Lights and AUX
Dimming settings for LV, low beam, and AUX outputs.
SX2 Parameters: Settings and Brake Configuration
Low Beam Dimming and Brake Settings
Dimming mask for low beam and brake settings.
SX2 Parameters: Trim, Ramps, and Identification
Brake Ramps and Identification Parameters
Settings for brake ramps and identification.
SX2 Parameters: AUX Switch-off and Timers
Low Beam Mapping and Shunting/Deceleration Timers
Mapping for low beam and timers for shunting/deceleration.
SX2 Parameters: Driving Timers and Conditions
Driving Timers and Speed Steps
Timers and speed steps for driving.
SX2 Parameters: Conditions for LR and AUX
Initial Mapping for AUX Outputs
Initial mapping for AUX outputs.
SX2 Parameters: Brake Button and Function Interchange
Brake Button Function Mapping
Mapping for the brake button function.
SX2 Parameters: Function Interchange F10-F12 and AUX Effects
Effect and Parameter for AUX3-AUX6
Settings for effect and parameter of AUX3 through AUX6.
Sound Parameters: Function Mapping
Driving and Secondary Sound Mapping
Mapping for driving and secondary driving sounds.
Sound Parameters: Volume Control
Total Volume and Driving Sound Volume
Settings for total volume and driving sound volume.
Sound Parameters: Coasting, Chuffs, and Brake Squeal
Coasting, Chuffs, and Brake Squeal Settings
Settings for coasting delay, chuffs, and brake squeal.
Sound Parameters: Modulation and Write Protection
Write Protection and Threshold Values
Settings for write protection and ZVS threshold value.
Sound Parameters: Volume and Function Assignments
Function Assignments for Idle and Acceleration
Assignments for automatic idle and forced acceleration.
Supplement 1: Function Mapping Notes
Output Value Configuration
How to set output values for functions.
Coupling Operation with Function Keys
Operating Couplings with 1 Function Key
How to operate couplings using one function key.
Need help?
Do you have a question about the SD10A and is the answer not in the manual?
Questions and answers