Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Pro-face GP2301-SC41-24V
Summarization of Contents
Chapter 1 Introduction
1.1 System Design
Overview of how the GP unit connects to other devices and systems.
1.1.1 GP-2300 Series System Design
System configuration diagram for the GP-2300 Series.
1.1.2 GP-2301 Series System Design
System configuration diagram for the GP-2301 Series.
1.2 Accessories
Lists optional software, cables, and hardware for the GP unit.
Chapter 2 Specifications
2.1 General Specifications
Covers electrical, environmental, and structural properties of the unit.
2.1.1 Electrical
Details input voltage, power consumption, and insulation resistance.
2.1.2 Environmental
Specifies operating temperature, humidity, dust, and vibration limits.
2.1.3 Structural
Information on grounding, ratings, dimensions, weight, and cooling.
2.2 Functional Specifications
Describes display, memory, clock, and interface capabilities.
2.2.1 Display
Details display type, resolution, colors, and font capabilities.
2.2.2 Memory
Information on application memory and data backup memory.
2.2.3 Clock
Details clock resolution and accuracy.
2.2.4 Interfaces
Lists available serial, Ethernet, tool, and CF card interfaces.
2.3 Interface Specifications
Detailed pin assignments and signal names for interfaces.
2.3.1 Serial Interfaces (COM1)
Pin assignments for RS-232C/RS-422 serial interface (COM1).
2.3.2 Serial Interfaces (COM2)
Pin assignments for RS-232C serial interface (COM2).
2.4 Part Names and Functions
Identifies physical components and their purpose on the GP unit.
2.5 Dimensions
Provides physical dimensions and panel cut specifications.
2.5.1 GP-2300/2301 Series External Dimensions
External physical measurements of the GP unit.
2.5.2 Panel Cut Dimensions
Required panel opening size for installation.
2.5.3 Installation Fasteners
Details the dimensions of mounting screws and fasteners.
Chapter 3 Installation and Wiring
3.1 Installation
Procedures for physically mounting the GP unit.
3.1.1 Installation Procedures
Step-by-step guide for installing the GP unit into a panel.
3.2 Wiring Cautions
Safety precautions and guidelines for connecting power and signals.
3.3 Tool Connector
Information on connecting the data transfer cable.
3.4 Ethernet Cable Connector
Location and details of the Ethernet connection port.
3.5 CF Card Installation and Removal
Steps and precautions for inserting and removing CF cards.
Chapter 4 Settings
4.1 Types of Settings
Overview of how to access and use the GP unit's settings menu.
4.1.1 Offline
Settings related to network, buzzer, and backlight control.
4.1.2 System
Settings for stylus, date/time, restart, version, and language.
Chapter 5 Troubleshooting
5.1 Troubleshooting Checklists
Guides for diagnosing and resolving common GP unit problems.
5.1.1 No display
Specific checks and countermeasures for blank screen issues.
5.1.2 Connected devices cannot be used
Steps to diagnose and fix issues with connected devices.
5.2 SELF TEST
Information on the GP unit's built-in diagnostic features.
5.2.1 SELF TEST item list
Lists the available self-test functions for diagnosis.
5.2.2 SELF TEST - details
Explains the purpose and execution of each self-test item.
Chapter 6 Maintenance
6.1 Regular Cleaning
Instructions for cleaning the GP unit's display and exterior.
6.1.1 Cleaning the Display
Specific methods for cleaning the GP unit's screen safely.
6.1.2 Installation Gasket Check/Replacement
Procedures for inspecting and replacing the unit's installation gasket.
6.2 Periodic Check Points
Regular inspection points to maintain optimal unit condition.
6.3 Replacing the Backlight
Guidelines and warnings for replacing the unit's backlight.
Need help?
Do you have a question about the GP2301-SC41-24V and is the answer not in the manual?
Questions and answers