Table of Contents
Advertisement
Operation &
Maintenance Manual
D65EXi
D65PXi
BULLDOZER
SERIAL NUMBER
D65EXi-18 - 90023
D65PXi-18 - 90023
WARNING
Unsafe use of this machine may cause serious injury or
death. Operators and maintenance personnel must read
this manual before operating or maintaining this
machine. This manual should be kept inside the cab for
reference and periodically reviewed by all personnel who
will come into contact with the machine.
-18
-18
and up
and up
ORIGINAL INSTRUCTIONS
EENAM03390
Advertisement
Chapters
Table of Contents
Related Manuals for Komatsu D65PXi-18
Summarization of Contents
Foreword
Intelligent Machine Control System Overview
Explanation of the automated system's purpose and benefits.
Before Reading This Manual
Safety Information and Manual Handling
Emphasizes reading safety messages and proper manual storage.
Safety Information
Understanding Safety Signal Words
Defines DANGER, WARNING, CAUTION, and NOTICE for hazard identification.
Introduction
Machine Features and Operational Notes
Highlights key capabilities and important usage considerations.
Safety
General Precautions for Operation & Maintenance
Fundamental safety guidelines for all machine activities.
Operator Safety: Entry, Exit, and Leaving Procedures
Steps for safe machine access and departure.
Blade Automatic Control Safety Precautions
Specific safety warnings related to the automatic blade control system.
Operation Safety Precautions
Key safety protocols to follow during machine operation.
Maintenance Safety Precautions
Essential safety guidelines for performing maintenance tasks.
Operation
Machine Components and Controls Overview
Identification of machine parts, controls, and the Intelligent Machine Control system.
Control Box Interface and Functions
Description of the control box layout and key features.
Intelligent Machine Control System Operation
Detailed guide to using the automated control system.
System Setup, Calibration, and Checks
Pre-operation procedures, including system setup and sensor calibration.
Blade Control Modes and Adjustments
Configuration of blade control, offsets, dozing modes, and load settings.
Using Automatic Blade Control Features
Step-by-step instructions for activating and using the automatic system.
Specific Operation Techniques and Precautions
Guidance on dozing, grading, leveling, and safety considerations for various tasks.
Transportation
Antenna Cable Removal for Transport
Procedure for removing the antenna cable before transportation.
Precautions for Long-Term Storage
Battery Disconnect Switch Procedure for Storage
Steps to prepare the machine for extended storage.
Troubles and Actions
Control Box and System Troubleshooting
Diagnosing and resolving issues with the control box and system.
GNSS and Satellite Signal Troubleshooting
Resolving problems related to GPS reception and accuracy.
Understanding Control Box Messages
Interpreting error messages and taking corrective actions.
Handle Control Box
3DMC Software Interface and Keyboards
Introduction to the 3DMC software and input methods.
File Menu Operations and Data Management
Managing project files, surfaces, layers, and control points.
Control Menu and System Configuration
Configuring machine parameters, as-built data, blade control, and calibration.
Tools Menu Functions and Operations
Utilizing measurement, navigation, topographic survey, and supervisor mode.
View Menu and Display Customization
Tailoring screen views, display options, and element settings.
Main Window Display Elements and Operation
Understanding on-screen information, shortcuts, toolbars, and pop-up menus.
Specifications
D65EXi-18 Model Specifications
Technical details for the D65EXi-18 model.
D65PXi-18 Model Specifications
Technical details for the D65PXi-18 model.
Need help?
Do you have a question about the D65PXi-18 and is the answer not in the manual?
Questions and answers