NI PXIe-4305 Calibration Procedure

32 ch, 24-bit, +-42 v, 5 ks/s or 51.2 ks/s simultaneous filtered data acquisition module

Table of Contents

Download this manual

CALIBRATION PROCEDURE

NI PXIe-4304/4305

32 Ch, 24-bit, ±42 V, 5 kS/s or 51.2 kS/s Simultaneous Filtered Data

Acquisition Module

Français

This document contains the verification and adjustment procedure for the National Instruments

PXIe-4304/4305 module.

Contents

Software.................................................................................................................................... 1

Documentation.......................................................................................................................... 2

PXIe-4304/4305 Verification and Adjustment......................................................................... 3

Test Equipment................................................................................................................. 3

Connecting the TB-4304 .......................................................................................... 4

Test Conditions................................................................................................................. 5

Initial Setup....................................................................................................................... 6

Accuracy Verification....................................................................................................... 6

Adjustment........................................................................................................................ 8

EEPROM Update ............................................................................................................. 9

Reverification ................................................................................................................... 10

Specifications............................................................................................................................ 10

World Wide Support and Services ........................................................................................... 10

Calibrating the NI PXIe-4304/4305 requires the installation of NI-DAQmx on the calibration

system. Driver support for calibrating the PXIe-4304/4305 was first available in

NI-DAQmx 15.1.1. For the list of devices supported by a specific release, refer to the

NI-DAQmx Readme, available on the version-specific download page or installation media.

You can download NI-DAQmx from

LabWindows™/CVI™, C/C++, C#, and Visual Basic .NET. When you install NI-DAQmx, you

only need to install support for the application software that you intend to use.

Deutsch

ni.com/manuals

ni.com/downloads

. NI-DAQmx supports LabVIEW,

Table of Contents

Need help?

Do you have a question about the PXIe-4305 and is the answer not in the manual?