GAS GAS EC FSE 400 - 2003 Service Manual page 56

TROUBLE
11 Exhaust pipe get out white
smoke.
12 Exhaust pipe get out brown
smoke.
13
Clutch not disengaging properly
14
Jumps out of gear
15
Clutch slipping
16
Stability Unsatisfactory
17
Shock absorption too hard
CAUSE
- Cylinder head gasket leaking.
- Air filter is bloked.
- No clutch lever play maladjusted.
- Friction plate worn or warped.
- Steel plate worn or warped.
- Gear lever damaged.
- Clutch spring broken or weak.
- Clutch release mechanism trouble.
- Clutch hub or housing unevenly worn.
- Shift fork worn, gear worn.
- Gear dogs and/or dog holes worn.
- Shift drum groove worn.
- Gear positioning.
- Lever spring weak or broken.
- No clutch lever play, maladjusted.
- Friction plate worn or warped.
- Steel plate worn or warped.
- Clutch spring broken or weak.
- Clutch disc unevenly worn.
- Control cable routing incorrect.
- Wiring routing incorrect.
- Steering stem locknut too tight.
- Steering stem bent.
- Front fork oil excessive.
EC FSE 2003 -
- Change cylinder head gasket leaking. Go to specialized
garage.
- Clean or change the air filter. Go to specialized garage.
- Go to specialized garage.
- Change friction plate.
- Go to specialized garage.
- Change gear lever.
- Check or change clutch spring.
- Check clutch release mechanism.
- Change clutch hub.
- Change it and go to specialized garage.
- Change it and go to specialized garage.
- Change it and go to specialized garage.
- Change it and go to specialized garage.
- Change it and go to specialized garage.
- Go to specialized garage.
- Change friction plate and go to specialized garage.
- Change steel plate.
- Check or change clutch spring.
- Change clutch disc. Go to specialized garage.
- Move control cable or unscrew.
- Unscrew wiring routing.
- Change steering stem locknut.
- Change and go to specialized garage.
- Empty and review level oil.
58
-
REMEDY