Start The Engine - GAS GAS EC FSE 400 - 2003 Service Manual

START THE ENGINE

- You have to assure the motorcycle to the neutral position.
- Turn the key in the direction clock (position in "ON" (A)), by this
way the electric circuits will be open and then the engine will start.
The key will be locked into the contact.
- Whithout drive the twist grip, swich the electric start button (C).
(A)
(B)
(C)
EC FSE 2003 -
Stopping the Engine
- Change to the neutral position.
- After racing the engine slightly, close the throttle completely and
push the engine stop button(B).
CUIDADO
Stop the engine by the stop button (B). Don't use the key for stop
the engine! it can damage the injection system.
- Swich of the key in the opposite clock direction. The key will be
located to the left hand side (D), where all the electric circuits will be
closed. The engine will not start. The key can be pulled out of the
contact.
- The key can be extract.
NOTA:
Start the engine as soon as the key is turned to the "on" position
or the baattery might lose power.
13
-
(D)