Table of Contents
Advertisement
BASIC OPERATION
Before using the LCD TV:
Connect external equipments properly.
Insert the power plug, and the power LED indicator will light orange.
To operate your LCD TV, you may use the TV remote control or bottom panel buttons to select input
source, change channels, or adjust volume.
Power On/Off
To turn the LCD TV on/off:
Press POWER button on the bottom of LCD TV or press POWER button on your remote control to
turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.
Note:
1. When there is no signal in the PC mode, the power LED indicator lights orange after a few seconds' idleness.
2. Colour of LED indicator is per brand designed for ON.
Selecting input source
Press the INPUT button on the remote control, and use ▲▼ to select the required input source
between DTV, ATV, SCART, YPbPr, VGA, HDMI, AV, or S-Video, and then press OK to confirm.
DTV Channel Installation
When you set up for DTV channels for the first time, an Installation Guide screen will appear. Follow
the following steps to complete the installation process.
1. When Language is highlighted, use the ◄► buttons to select the language displayed on the
menu.
2. Press ▼ button to select Auto Tuning and press the OK button.
3. Press ◄► to select the Country where you operate the TV, then select Start and press OK. The
Auto Tuning automatically creates a list of receivable channels. Press the EXIT button at any
time to interrupt the channel scanning process. (The list cannot be created if interrupted)
12
Advertisement
Table of Contents
