Advertisement

Quick Links

Explanation of WARNING Symbols
Dangerous Voltage: The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence dangerous
voltage within the inside of the product that may be sufficient level to
constitute a risk of electric shock to persons.
Instruction: The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and servicing
instructions in the literature accompanying the appliance.

Safety instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this LCD TV near water.
6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.
7) Do not block any ventilation openings. Install your LCD TV in a well-ventilated
area.
8) Keep your LCD TV away from moisture, excessive dust and any heat sources,
such as radiators, heat registers, stoves, or any other apparatus (including
amplifiers) that produce heat.
9) Do not remove the back cover. There are no user-serviceable parts inside.
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
11) Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the LCD TV.
12) Never rest objects on the power cord or place it in high traffic areas. It is better to
use the point where they exit from the apparatus.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the LCD TV. When a cart is
used, use caution to avoid injury from tip-over.
15) Unplug this LCD TV during lightening storms or when unused
for long periods of time.
16) Refer all servicing to qualified service personnel-- Servicing may be required if the
LCD TV has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
1

Advertisement

Table of Contents
loading

Summary of Contents for AOC JC240AJ61ED

  • Page 1: Safety Instructions

    Explanation of WARNING Symbols Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons. Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
  • Page 2 17) Do not expose your LCD TV to dripping or splashing, and no objects filled with liquids be placed on it. 18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the back panel of unit. 19) This product is only to perform the useful function of entertainment and visual display tasks are excluded.
  • Page 3: Table Of Contents

    Content ACCESSORIES ........................1 FRONT PANEL CONTROL ....................2 BACK PANEL CONTROL ....................3 REMOTE CONTROL ......................4 Function of remote control button ................. 5 Teletext function control button ..................6 INSTALLATION ........................8 Connecting RF antenna, Cable TV Wire or DTV cable ..........8 Connecting to DVD/ Set Top Box ..................
  • Page 5: Accessories

    ACCESSORIES Thank you for purchasing this LCD-TV of high performance! This LCD-TV package comes with: LCD TV User’s Manual Remote Control Battery AAA x 2 Power Cord VGA Cable RCA A/V Cable...
  • Page 6: Front Panel Control

    FRONT PANEL CONTROL Volume Down (Adjust Decreasing) Volume Up (Adjust Increasing) On Screen Display Menu Key (Back to Previous Menu) Power On/Off Switch Scroll Down (Channel Down) Scroll Up (Channel Up) Input Source Selection (Enter) Power LED Indicator/ Remote Control Receiver...
  • Page 7: Back Panel Control

    BACK PANEL CONTROL Power Input (AC Input) Headphone Jack HDMI (support HDCP or PC) Signal Input VGA (15 pin) Signal Input from Computer Audio Input for VGA or DVI YPbPr / HD Component Video Input Audio Input for AV, S-Video or YPbPr components (left/ right) S-Video Input SCART Signal Input Composite Video Input...
  • Page 8: Remote Control

    REMOTE CONTROL...
  • Page 9: Function Of Remote Control Button

    Function of remote control button POWER Power ON/OFF DTV/RADIO Digital TV function. Switch between DTV/RADIO programs INFO Display the current information SLEEP Set TV Sleep timer SOUND Reverb Sound effect selections on Standard, Music, Movie, Sports, and User FREEZE Freeze picture 0~9 NUMBER Switch channel number keys The tuner contains automatic volume control circuitry (AVC) to...
  • Page 10: Teletext Function Control Button

    Teletext function control button TEXT/ MIX/ PICTURE button In TV Mode: Press the TEXT/ MIX/ PICTURE button to enter the Teletext mode. In TELETEXT Mode: Press the button again to superimpose a Teletext broadcast onto the screen of current TV program (mixed Mode). In MIXED Mode: Press the button again to return back to the normal TV Screen (current program).
  • Page 11 SIZE button Select double height text under Teletext mode for full screen. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. LIST button Press this button you force the Teletext to LIST Mode.
  • Page 12: Installation

    INSTALLATION Connecting RF antenna, Cable TV Wire or DTV cable Make sure the power is OFF before installing your LCD TV. 1) ATV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV channels into memory with Auto Tuning function (See page 27) when using an antenna or cable TV system without a cable connecter box.
  • Page 13 2) With S-Video cable: S-Video Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player 3) With YPbPr cable: YPbPr Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player 4) With SCART cable: SCART Cable (not supplied) VCD or DVD Player...
  • Page 14: Connecting To The Headphone

    5) With HDMI cable: VCD or DVD Player HDMI Cable (not supplied) 6) With HDMI to DVI cable: Audio Cable (not supplied) VCD or DVD Player HDMI-DVI Cable (not supplied) Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately) Headphone (not supplied)
  • Page 15: Connecting To A Computer

    Connecting to a Computer 1) VGA (15pin D-Sub): Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. PC Audio In Cable (not supplied) VGA 15Pin Cable...
  • Page 16: Basic Operation

    BASIC OPERATION Before using the LCD TV: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. To operate your LCD TV, you may use the TV remote control or bottom panel buttons to select input source, change channels, or adjust volume.
  • Page 17: Volume Adjust

    Volume Adjust Press VOL+/- to adjust volume. To turn off the volume, press MUTE. To restore volume, press MUTE again, or press VOL+/- directly. Channel Select Press number buttons or PROG ▲▼ buttons to select the desired channels. Return to previous channel, press RETURN button. Sleep Time Setting Repeatedly press SLEEP key to set the off timer.
  • Page 18: Subtitle Select

    Subtitle Select Press the SUBTITLE key to select subtitle language. Use ▲ or ▼ button to select subtitle language. By selecting through the Subtitle key, the setting can only last until the TV is switch off, and will not be saved.
  • Page 19: Tv/Dtv

    TV/DTV Repeatedly press the TV/DTV key to switch between TV/DTV. When pressed in other input source, it will automatically direct to TV source. INFO To display the current information of the LCD TV: Press INFO, and the banner displays the program No., current time, program name, teletext info, etc. When in ATV mode, the displayed items may be different.
  • Page 20: Favorite List

    Favorite List Press FAVORITE key to display the favorite channels you’ve added to the FAVORITE LIST. You can use ▲ or ▼ to select a favorite channel, and then press OK to direct to that channel immediately. To set up favorite channels, select the Program Edit function in CHANNEL menu. Electronic Program Guide (EPG) Press the GUIDE button to display the Electronic Program Guide.
  • Page 21: Using The Osd Menu

    Using the OSD Menu You are able to use OSD menus to adjust various settings by using your remote control or menu button on the bottom of the LCD TV. The basic operation is as following: Press MENU to display OSD menu. Use ◄►...
  • Page 22: Advanced Operation-Osd Menu

    ADVANCED OPERATION—OSD MENU You can use the OSD menu to adjust various settings for your LCD TV. Press the MENU button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Picture Menu —To adjust the picture quality In ATV, DTV, AV, S-Video, SCART, YPbPr, HDMI source: Note: The LOCK and CHANNEL menu icons are only enabled in ATV and DTV source.
  • Page 23 Note: The LOCK and CHANNEL menu icons are only enabled in ATV and DTV source. In VGA source:...
  • Page 24 Picture Mode: To select picture mode between Standard, Mild, User, and Dynamic. When user is selected, you can adjust the level of Contrast, Brightness, Colour, Tint, and Sharpness separately. Contrast: To adjust contrast of video. Brightness: To adjust luminance of video. Colour: To adjust colour.
  • Page 25: Sound Menu

    ◄►. When User is selected, you can adjust the level of Red, Green, and Blue separately. Aspect Ratio: To select image size between Full, Zoom1, Zoom2, Panorama, Auto (auto format switching), and 4:3 with ◄►. When in HDMI source and Over Scan (see page 24) is set to off, the option of Full will be replaced by UnderScan, which means full screen without over-scan.
  • Page 26: Time Menu

    TIME Menu —To set up time zone Note: The LOCK and CHANNEL menu icons are only enabled in ATV and DTV source. Clock: To adjust the current time. Press ► to enter sub-menu. Press ▲▼ to select Date, Month, Year, Hour and Minute, and press ◄► to set current time. When you complete the adjustment, move to Close and press OK to save the result.
  • Page 27: Option Menu

    OPTION Menu —To adjust OSD setting Note: When in AV, S-Video, SCART, YPbPr, VGA, HDMI source, some of the optional items will be disabled. Also, the LOCK and CHANNEL menu icons will be disabled.
  • Page 28 Language: To select the OSD language between English, Spanish, French, Italian, Dutch, Portuguese, Finnish, Swedish, and German with ◄►. Audio Languages: Set the primary and secondary audio languages for watching program. (only available in DTV) Subtitle Language: Set the primary and secondary subtitle languages for displaying subtitle. (only available in DTV) Hearing Impaired: To provide close-captioning function for the hearing impaired, if the program provides it.
  • Page 29: Lock Menu

    LOCK Menu —To set up parental control It is only active in TV source. To access the LOCK Menu, enter the 4-digit number password. The factory default password is 0000. Lock System: If enabled, a password is required for access to the Auto Tuning, DTV Manual Tuning, ATV Manual Tuning and Program Edit in Channel menu.
  • Page 30 Block Program: To set the program to be blocked. Press ►. Select the program you want to block, and press Green key on it. To watch the blocked program, the password is required. Parental Guidance: To set the rating level of the programs. If the rating of the displayed program is higher than the rating set in the Parental Guidance, the program will be locked.
  • Page 31: Channel Menu

    CHANNEL Menu —To set up for TV It is only active in TV source. In ATV source: In DTV source: Select: Selects the Auto Tuning range. Auto Tuning: To automatically preset the channels into TV’s memory. Select the country of your area with ◄►, select Start, and then press OK to perform Auto Tuning.
  • Page 32 Note: After auto scanning all the channels, you need not to do it again when turning on your TV next time. DTV Manual Tuning: Press ◄► to select the channel, then press OK to start scan. ATV Manual Tuning: Press the ▲▼ to select the items, and press the ◄► button to adjust. See details in the following sub-options.
  • Page 33 Current CH: Press ◄► to select the current channel. Search: Press ◄► to search backward/forward. Press MENU or EXIT to stop the program searching. Fine-Tune: Press ◄► to fine tuning when the signal level of the current channel is weak. Skip: Press ◄►...
  • Page 34 CI Information: To check the CI information, the CI (CAM) Card must be plugged in. Press ► to enter CAM Menu. Note: The OSD is only for illustration and the menu options and screen format will vary according to the services provider.
  • Page 35 Authorizations: Enter the factory default 4-digit pincode, then press OK. Pincode will vary according to services provider. Maturity rating: Enter the maturity rating you want, then press OK. Bolts: Select Maturity rating or Consultations, then press OK to switch between Free and Locked.
  • Page 36 Changing PIN code: To change the pincode for entering Authorization menu. Enter your new pincode and press OK, then repeat again to confirm. Module information: Press OK to display module information.
  • Page 37: Technical Information

    TECHNICAL INFORMATION Type 23.6” TFT Active Matrix 0.2715 (H) x 0.2715 (V) mm pixel pitch Colour Filter RGB vertical stripe Glass surface Anti-Glare Input signal RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, fh: 30-82 kHz, fv:55-76 Hz TV system Antenna - PAL / SECAM and DVB-T Video 1 composite RCA, 1 S-Video, 1 SCART, 1 HDMI, 1 YPbPr component,...
  • Page 38: Safety Precautions

    SAFETY PRECAUTIONS This LCD TV is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. Warnings This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV.
  • Page 39: Care And Maintenance

    CARE AND MAINTENANCE Care Avoid exposing your LCD TV directly to sunlight or other heat source. Place your LCD TV away from the sunlight to reduce glare. Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV. Make certain your LCD TV is installed in a clean and moisture-free area.

Table of Contents