Advertisement
Quick Links
CC1N7785en
20.11.2017
Burner Controls
Burner controls
For gas, oil or dual-fuel forced draft burners of medium to high capacity
For multistage or modulating burners in continuous operation
With air pressure supervision for checked air damper control.
Flame supervision
- LOK16: With silicon detector RAR
- LGK16: With flame detector QRA53/QRA55/ionization probe
Burner control for oil burners or gas burners in accordance with EN 298:2012
Suitable for use with air heaters (WLE)
With self-checking flame signal amplifier
The LOK16.../LGK16... and this Data Sheet are intended for use by OEMs which
integrate the burner controls in their products.
Building Technologies Division
7
785
LOK16...
LGK16...
Advertisement
Related Manuals for Siemens LGK16.635A27
Summarization of Contents
Use
Flame Supervision for LOK16
Details flame supervision for LOK16 models.
Flame Supervision for LGK16
Details flame supervision for LGK16 models.
Mounting Notes
Upgrading Existing Plant
Information on integrating into existing systems.
Start Repetition in Loss of Flame
Configuration for restarting after flame loss.
Accessories
Oil Burner Controls Accessories
Details on LOK16 oil burner controls without plug-in bases.
Connection Accessories
Accessories for connecting burner controls, including plug-in bases.
Flame Detectors for Oil Burners
Information on compatible photocell detectors.
Technical Data
General Unit Data
Key electrical and physical specifications for the unit.
Environmental Conditions
Storage, transport, and operation environmental requirements.
Flame Supervision Data
Detector Current Measurement
Details on measuring detector current and relevant circuits.
Function
Principle of Self-Supervision
How the self-supervision function works.
Prerequisites for Burner Startup
Conditions that must be met before initiating burner startup.
Startup Program
Expanding Flame Burners Startup
Specific startup sequence details for expanding flame burners.
Interrupted Pilot Burner Startup
Burner Operating Positions
How the burner operates at different load positions.
Controlled Shutdown and Postpurge
Process of controlled shutdown and postpurge.
Permissible Afterburn and End Sequence
Details on the afterburn time and signal reception.
Need help?
Do you have a question about the LGK16.635A27 and is the answer not in the manual?
Questions and answers