Advertisement
Quick Links
Advertisement
Related Manuals for SilverStone SST-CS350
Summarization of Contents
Product Overview
Introduction
Overview of the CS350 case, highlighting its modern design and hot-swappable drive support.
Special Features
Details on features like magnetic fan filter, expansion card support, and drive security.
Specification
Technical specifications including model, material, dimensions, drive bays, and connectivity.
Disassemble Chart
Component Identification
Diagram showing case components and a table listing screws and their purposes.
Exterior Overview
3/4 Views
Illustrations showing front, rear, left, and right 3/4 views of the case exterior.
Case Exterior Views
Orthogonal Views
Diagrams of the case from top, bottom, left, middle, right, and rear perspectives.
Installation Guide
Step 01: Preparation
Instructions on gathering components, checking compatibility, and preparing tools before installation.
Step 02: Motherboard Installation
Steps to install memory, CPU cooler, connect SATA cables, and mount the motherboard.
Step 03: Power Supply Installation
Guidance on how to install the power supply unit into the case.
Step 04: Expansion Slot Cover Removal
Instructions for removing screws to take off expansion slot covers and the cover plate.
Step 05: Graphic/Expansion Card Installation
Steps to install graphic cards or other expansion cards into the case.
Step 06: Securing Expansion Cards
How to secure installed cards using adjustable card braces and reattaching the cover plate.
Step 07: Internal Drive Installation
Instructions for installing internal 2.5" drives and 3.5" drives into the case.
Step 08: Hot-Swap Drive Installation
Guidance on installing a 3.5" drive into the hot-swap tray and locking it.
Step 09: Cable Connection Check
Final check of all cable connections before reinstalling the top cover.
How to Install 5.25" Device?
Step 01: Remove Screws
Instructions to remove screws using a screwdriver as shown in the illustration.
Step 02: Install Device
Remove drive cage, install 5.25" device, align, and secure with screws.
Step 03: Reinstall Cage
Reinstall the 5.25" drive cage assembly back into the case and secure it with screws.
How to Install Slim Optical Drive?
Step 01: Remove Cage and Bezel
Remove the optical drive cage and front bezel in the specified direction.
Step 02: Install Drive
Install the slim optical drive into its designated bay.
Step 03: Secure Cage
Place the slim optical drive cage back and secure it with screws.
How to Adjust Expansion Slot Brace?
Step 01: Remove Brace Screws
Instructions to remove card brace screws located on each side of the case.
Step 02: Adjust Brace Position
Adjust card braces to a suitable position following the direction shown in the illustration.
Step 03: Secure Brace
Secure the adjusted card brace with screws.
Connector Definition
Front Panel Connectors
Guide to connecting power switch and reset switch to the motherboard.
LED Indicators
Explanation of Power LED and HDD LED connections and polarity.
Front I/O Connector Guide
Pin definition for front USB 3.0 and other I/O connectors for simplified installation.
Component Size Limitations
CPU Cooler Height Limitation
Specifies the maximum height for CPU coolers, including clearance over the motherboard.
Power Supply Limitation
Details the compatible depth for PS2 (ATX) power supplies.
Graphic Card Height Limitation
Defines the height limits for expansion cards and the function of the top card brace.
Warranty and Compliance
Warranty Terms & Conditions
Details product warranty coverage, limitations, and procedures for claims.
Need help?
Do you have a question about the SST-CS350 and is the answer not in the manual?
Questions and answers