Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for d&b audiotechnik J8
Summarization of Contents
Safety Precautions
Intended Use
Specifies the intended purpose and proper usage of J-Series rigging components.
Load Capacity and System Safety
Details the weight limits and safety aspects for J-Series flying frames and system configurations.
Operational Safety
Outlines critical safety measures during assembly and operation to prevent injury.
J-Series Rigging Concept
Z5300 J Flying Frame
Introduces the Z5300 J Flying frame and its integrated rigging components.
System Components Overview
Lists and describes all components supplied with the Z5300 J Flying frame.
Z5300 J Flying Frame Center Bar
Details the center bar of the Z5300 J Flying frame and its user instructions.
Z5300 J Flying Frame Dimensions
Provides the dimensional specifications for the Z5300 J Flying frame.
Dimensions of the Mounting plate [1.3]
Presents the dimensions of the mounting plate accessory for the J Flying frame.
Z5303 J Safety Chain
Describes the Z5303 J Safety chain, used as a secondary safety measure.
Optional Components
Lists and describes optional accessories for the J-Series rigging system.
Z5305 J Hoist Connector Chain
Details the Z5305 J Hoist connector chain for connecting lifting motors.
E7441 Touring Case 1 x Z5300 J Flying frame
Explains the E7441 Touring case for storing a J Flying frame and accessories.
Preparation
General Preparations
Covers initial steps like checking setup with ArrayCalc and clearing work areas.
Inspections
Emphasizes the importance of inspecting all system components before use.
J-Series Locking pins
Explains the assembly and function of the J-Series locking pins for securing components.
Splay link position at the Z5300 J Flying frame
Details how to adjust the Splay link position on the frame for different cabinet types.
Suspension of the Z5300 J Flying frame
Covers the procedures for suspending the Z5300 J Flying frame.
J Load adapter
Describes the J Load adapter and its proper attachment for suspension.
Single hoist set up
Explains how to suspend the array using a single pick point and its limits.
Dual hoist set up
Details the procedure for suspending the array using two pick points and its limits.
Secondary safety
Covers the attachment of secondary safety devices to the J Flying frame.
Secondary safety at the Z5300 J Flying frame
Details the attachment of secondary safety devices to the Z5300 J Flying frame.
Horizontal aiming and securing of the array against rotation
Guides on setting horizontal aiming and securing the array against rotation and swing.
J-Series arrays and assembly
Variant 1: J8/J12 Array
Describes the assembly of an array using J8/J12 loudspeakers.
Variant 2: J-SUB and J8/J12 Arrays
Details the assembly of mixed arrays with J-SUB and J8/J12 cabinets.
Variant 3: J-SUB Array
Describes the setup of an array consisting only of J-SUB loudspeakers.
Variant 4: J-Series Ground Stacks
Covers ground stacked configurations for J-Series loudspeakers.
Limitations for J-Series Ground Stacks
Lists the maximum cabinet limitations for J-Series ground stacks.
Preparations
Outlines the preparatory steps for J-Series ground stack configurations.
J8/J12 Ground Stack Assembly
Details the assembly process for J8/J12 cabinets in a ground stack setup.
Ground Stack with J-SUB and J8/J12
Describes ground stacked configurations combining J-SUB and J8/J12 cabinets.
J-SUB Stacks
Covers the setup of conventional ground stacks using only J-SUB cabinets.
Wind Loads
Wind Speed Scale and Effects
Explains Beaufort wind scale and its effects on land and potential risks.
Care and Maintenance / Disposal
Transport / Storing
Provides guidelines for the safe transport and storage of rigging components.
Visual and functional inspection
Details the procedures for inspecting cabinets, locking pins, and links for damage.
Disposal
Explains how to dispose of rigging components in accordance with environmental regulations.
EC Declaration of Conformity
Covered Equipment and Directives
Lists compliant equipment and relevant EC directives for machine safety.
Need help?
Do you have a question about the J8 and is the answer not in the manual?
Questions and answers