Related Manuals for KUHN FC 4000 G
Summarization of Contents
Introduction
About Product Improvements
Information about product development and manufacturer's rights to change.
Safety Recommendations
Signal Word Definitions
Explanation of DANGER, WARNING, and CAUTION signal words used in the manual.
Designated Use of Mower Conditioner
Defines proper and improper uses of the FC 4000 mower conditioner.
Prohibited Mower Uses
Lists prohibited uses of the mower conditioner to prevent damage or injury.
General Safety Principles
Covers basic safety principles and precautions for operation and transport.
Attachment and PTO Safety
Safety precautions related to attaching the mower to the tractor and PTO.
Tires and Wheels Safety
Safety recommendations for tires and wheel maintenance and operation.
Hydraulic System Safety
Safety guidelines for working with the hydraulic system and potential hazards.
Technical Specifications
Tractor Requirements
Specifies the necessary tractor specifications for operating the FC 4000 mower.
Attaching and Detaching the Mower
Attaching Mower to Tractor
Step-by-step guide for connecting the mower to the tractor's hitch.
Detaching from Straight Hitch
Procedure for safely detaching the mower from a straight hitch tractor.
Attaching Gyrodine Swivel Hitch
Instructions for attaching the mower using the Gyrodine swivel hitch.
Detaching from Gyrodine Hitch
Procedure for safely detaching the mower from a Gyrodine swivel hitch.
Attachment Check List
A checklist to ensure proper attachment of the mower before operation.
Transporting the Mower
Transport Preparation Steps
Steps to prepare the mower for safe transport on public roads.
Adjustments and Settings
Cutting Height Adjustment
How to adjust the cutting height of the mower conditioner.
Header Floatation Adjustment
Procedure for adjusting the header suspension for optimal ground following.
PTO Speed Settings
Recommendations for setting the correct PTO speed for optimal performance.
Forward Speed Guidelines
Recommended forward speeds for various crop conditions.
Windrow Formation Adjustments
How to adjust baffles and shields for optimal windrow formation.
Conditioning Intensity Adjustment
Guide to adjusting the intensity of the conditioning system.
Field Operations
Setting Work Position
Steps to set the mower into its working position.
180 Degree Turn Procedure
Instructions for making U-turns in the field to minimize interference.
Lubrication and Fluid Maintenance
Lubrication Chart and Intervals
Table detailing grease points and service intervals for various components.
Grease Fittings Locations
Visual guide to the location of grease fittings on the PTO and other parts.
Gearbox Oil Maintenance
Procedures for checking and changing oil in the mower's gearboxes.
Maintenance and Servicing
Blade and Bolt Inspection
Guidelines for inspecting mower blades, bolts, and nuts for damage or wear.
Blade Replacement
Detailed steps for replacing worn or damaged mower blades.
Disc Inspection and Replacement
Information on disc inspection, replacement, and safety precautions.
Half Disc and Skid Shoe Service
Procedures for servicing half discs and replacing skid shoes.
Friction Slip Clutch Service
How to adjust and troubleshoot the friction slip clutch.
Drive Chain Maintenance
Instructions for maintaining the drive chain for the upper rolls.
Hydraulic System Maintenance
Maintenance procedures for the mower's hydraulic system.
Electric Connector Guide
Information on the wire color code and 7-pin connector.
Fastener Torque Chart
Table of recommended torque values for metric fasteners.
Optional Equipment
Drawbar Safety Chain
Details about the optional drawbar safety chain.
Quick Hitch Installation
Instructions for installing the quick hitch adaptation kit.
Storage Procedures
End of Season Storage
Steps for properly storing the mower at the end of the season.
Beginning of Season Preparation
Procedures for preparing the mower for use at the beginning of the season.
Limited Warranty Information
Warranty Exceptions and Responsibilities
Details warranty exclusions and customer's cost responsibilities.
Warranty Provisions and Claim Procedure
Outlines conditions for warranty validity and the claim submission process.
Need help?
Do you have a question about the FC 4000 G and is the answer not in the manual?
Questions and answers