Related Manuals for Claydon HYBRID T8
Summarization of Contents
Identification of Machine
Identification Plate
Definitions for fields on the machine identification plate in UK/German and French.
Spare Parts Ordering Procedure
Information on how to order spare parts for the machine.
Warranty Registration
Instructions for registering the machine's warranty.
Technical Data
Specifications and technical data for the Claydon Hybrid T6 & T8 drills.
Safety
Decal Locations
Locations of safety decals on the machine for operator safety.
Safety Decals for Bout Markers
Specific safety decals applicable when bout markers are fitted to the machine.
Decal Meanings
Explanation of various safety decals used on the machine and their meanings.
Directive Provisions
Machine Overview
Explanation of directional terms like front, rear, left, and right for the machine.
Airborne Noise Emissions
Details the A-weighted emission sound pressure level of the fan.
General Warnings and Cautions
Important safety warnings and cautions to be observed during operation.
Warning Symbols Explained
Explanation of common warning symbols and their significance.
Pre-Work Preparation
Introduction and Toolbox Contents
Overview of pre-work checks and the contents of the supplied tool box.
Connecting the Drill to the Tractor
Guidance on connecting the drill to various tractor drawbar configurations.
Electrical Connections
Instructions for connecting the drill's electrical system and control unit.
Hydraulic Connections
Detailed instructions for connecting the drill's hydraulic system, including important notes.
Main Electrical Isolator
Location and operation of the main electrical isolator switch.
Accessing the Hopper
Procedure for accessing the hopper platform, including safety warnings.
Setting the Marker Arm Width
Instructions for setting the width of the marker arms for optimal coverage.
Marker Arm Tine Adjustment
How to adjust the aggressiveness of the marker arm tines.
In Field Operation
Unfolding the Drill
Step-by-step guide to unfolding the drill for field work.
Operating the Drill
Instructions on how to operate the drill in the field, including bout markers.
Folding the Drill
Procedure for folding the drill for transport after field operation.
Seeding Settings
Guidance on the seeding settings and their impact on the drill's performance.
Setting Machine Level
How to set the machine level for accurate and consistent seed depth.
Checking Seeding Depths
Method for verifying and ensuring consistent seeding depth across the drill.
Adjusting the Leading Tine
Instructions for adjusting the depth and position of the leading tines.
Setting the Seed Depth
Guidance on setting the correct drilling depth for different crops.
Setting Up the Ski Board
How to set up the ski boards to level ridges and ensure proper operation.
Ski Boards and Tines Adjustment Settings
Recommended settings for ski boards and tines based on field conditions.
Pre-Emergence Markers
Information on fitting, adjusting, and using pre-emergence markers.
Need help?
Do you have a question about the HYBRID T8 and is the answer not in the manual?
Questions and answers