Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for IRIS Touch 440
Summarization of Contents
Before You Start
Ethernet Connection Details
Information required for customer's Ethernet (LAN) network connection.
GPRS SIM Card and Access Point Name
Details needed for GPRS connection, including APN, username, and password.
Installing the IRIS Touch
Mounting
Guidance on choosing a location and securing the dialler within an enclosure.
Power
Instructions on connecting the power supply and voltage requirements.
Connections
Details on connecting Ethernet, GPRS antenna, and other optional interfaces.
GSM SIM card (IRIS Touch 400 & 440)
Instructions for fitting the SIM card after GPRS network scan.
Dial capture
Connecting the dial port to the alarm panel's telecoms line connection.
PIN Inputs
Details on using the 4 pin inputs for alarm messages or expansion.
Expansion board
Information on adding expansion boards for more inputs or PSTN dial out.
Switch on and test
How to check power application via the SYS LED indicator.
Configuration
Methods for configuring the dialler via touch screen or panel integration.
GPRS Network Scan
Procedure for scanning for GPRS network providers and signal strength.
Panel configuration
Configuring the dialler for dial capture telephone number and account number.
Testing
Performing a commissioning test with the monitoring centre.
Maintenance
Confirm current status
Checking the dialler's operational status via the touch screen.
Check software version / Reflash
Updating the dialler's software or reflashing it to the latest version.
Communication paths checks
Testing the configured communication paths (Ethernet/GPRS).
Test alarm panel alarms and communication to ARC
Performing alarm tests to the monitoring centre (ARC).
Need help?
Do you have a question about the Touch 440 and is the answer not in the manual?
Questions and answers