Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for IRIS Touch 400
Summarization of Contents
Installing the IRIS Touch
Mounting
Guidance on selecting a location and securing the dialler within an alarm panel or enclosure.
Power
Instructions for connecting the IRIS Touch dialler to a DC power supply, noting cable length restrictions.
Connections
Details on connecting various interface cables to the dialler PCB, including Ethernet and GSM antenna.
GSM SIM Card
Instructions on when to fit the SIM card, after performing the GPRS Network Scan.
Dial Capture
How to connect the dialler to an alarm panel's telecoms line using RJ45 or RJ11 cables and a sense resistor.
PIN Inputs
Information on using the 4 pin inputs for alarm messages via SMS or IP, and optional expansion.
Expansion Board
Details on adding expansion boards for more pin inputs or PSTN dial out capabilities.
Switch On and Test
Procedure to check power application by looking for the SYS LED flashing yellow on the dialler board.
Configuration
Methods for configuring the dialler via touch screen or alarm panel integration, including defaulting.
Panel Configuration
Steps for configuring the dialler with monitoring centre IP address, account number, and panel integration details.
Testing
Performing a full commissioning test with the monitoring centre to verify alarm transmissions.
Maintenance
Confirm Current Status
How to check the IRIS Touch status, indicating 'Ok' or 'Trouble' and viewing reports.
Check Software Version / Reflash
Procedure to check for software updates, reflash the unit, and manage passwords for EN50136-2.
Communication Paths Checks
Testing the configured communication paths (Ethernet/GPRS) for polling and alarm communications.
Test Alarm Panel Alarms and Communication to ARC
Performing alarm tests to the ARC and receiving confirmation of successful reception.
Need help?
Do you have a question about the Touch 400 and is the answer not in the manual?
Questions and answers