Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for IRIS Touch 420
Summarization of Contents
2. IRIS Touch Product Features
Key Features of IRIS Touch Models
Details the features of IRIS Touch models 400, 420, and 440, including connectivity and protocols.
4. IRIS Touch Board Configuration
IRIS Touch Board Layout Diagram
Diagram illustrating the IRIS Touch board with labels for ports, LEDs, and connectors.
SYS LED Status Indicators
Explains the meaning of SYS LED colors (yellow flashing/constant) for system status.
5. Before You Start: Prerequisites
Monitoring Centre (ARC) Information Required
Required details from the monitoring centre for alarm signal transmission.
Ethernet Network Connection Details
Customer's network details needed for connecting the IRIS Touch via Ethernet.
GPRS SIM Card and APN Setup
Information required for GPRS connection, including APN, username, password, and SIM PIN.
6. Installing the IRIS Touch Dialler
Mounting and Power Supply Installation
Guidance on selecting a location, securing the dialler, and connecting the DC power supply.
System Interface Connections
Details on connecting Ethernet, GSM antenna, dial capture, and expansion boards.
Optional Serial and CAN Bus Connections
Information on RS485, RS232 (TTL), RS232 port 1/2, and CAN bus connections for panel integration.
RS232 Connections for HHL/ESPA Panels
Specific wiring for IRIS Touch RS232 ports to HHL and ESPA fire panels.
GSM SIM Card Installation Procedure
Instruction not to fit the SIM card until after GPRS Network Scan is completed.
Dial Capture Connection Setup
How to connect the dialler to an alarm panel's telecoms line using RJ45 or RJ11 cables.
PIN Inputs Configuration Methods
Using the 4 pin inputs for alarm messages via SMS or IP, with open/close or sense resistor methods.
Expansion Board Installation Options
Details on adding expansion boards for more pin inputs or PSTN dial out functionality.
Initial Power On and Testing
How to confirm power is applied by checking the SYS LED status.
6.9. Configuring the IRIS Touch
Configuration Methods and Defaulting Options
Using touch screen, panel integration, or resetting dialler to factory defaults.
Touch Screen Configuration Guide
Steps to access the installer menu and change the default installer password.
GPRS Network Scan for Signal Strength
Performing a network scan without SIM to check GPRS signal strength for reliable connection.
Alarm Panel Configuration Steps
Setting up dial capture telephone number, account number, and panel integration details.
Commissioning and Final Testing
Performing a full commissioning test with the monitoring centre to verify alarm transmissions.
7. Maintenance of IRIS Touch
Routine Maintenance Inspection Tasks
Steps for maintenance: checking status, clearing faults, reflashing software, and testing paths.
Confirming Current System Status
Checking the dialler's operational status via the 'Status' screen on the touch interface.
Software Version Check and Reflash
Updating the dialler's software to the latest version via the 'Reflash' option.
Testing Communication Paths
Testing the configured Ethernet and GPRS communication paths using the 'Test' option.
Testing Alarm Transmission to ARC
Performing alarm tests to the monitoring centre (ARC) to ensure proper reception.
8. IRIS Touch Specifications
Transmission Paths Specifications Overview
Details on Ethernet and GPRS transmission standards, connections, and fault detection.
IP, Alarm Transmission, and Protocol Specs
Specifications for TCP ports, monitoring centre interface, dial capture, serial, PIN inputs, and alarm protocols.
Power, Environment, and Physical Specs
Details on power supply, current ratings, operating temperature, humidity, and physical dimensions.
Safety Precautions for IRIS Touch
SELV Definition and Interface Safety
Explanation of SELV and safety classifications for dial capture, power, and input interfaces.
IRIS Touch Compliance Information
European Directives Compliance
List of European Directives the IRIS Touch complies with.
European Standards Compliance (VdS)
Compliance with EN50131, EN50136, and EN54-21 standards, including security grades.
Need help?
Do you have a question about the Touch 420 and is the answer not in the manual?
Questions and answers