Table of Contents
Related Manuals for Belmont 905
Summarization of Contents
[1] SPECIFICATIONS
[2] CLASSIFICATION
Classification regarding electric shock protection and suitability for flammable atmospheres.
[3] WIRING DIAGRAM
Detailed schematics for connecting various components of the dental light system.
[4] POLE MOUNT TYPE (Type 901)
4-1. Dimensions (mm)
Technical dimensions for the pole mount type.
4-2. Installation Instructions
Step-by-step guide for installing the pole mount type.
[5] UNIT MOUNT TYPE (Type 920)
5-1. Dimensions (mm)
Technical dimensions for the unit mount type.
5-2. Installation Instructions
Step-by-step guide for installing the unit mount type.
[6] CEILING MOUNT TYPE (Type 902)
6-1. Dimensions (mm)
Technical dimensions for the ceiling mount type.
6-2. Installation Instructions
Step-by-step guide for installing the ceiling mount type.
[7] TRACK MOUNT LIGHT (Type 905)
7-1. Dimensions (mm)
Technical dimensions for the track mount type.
7-2. Ceiling Preparation
Procedures for preparing the ceiling for track mount installation.
7-3. Electrical Preparation
Steps for preparing the electrical connections for track mount.
7-4. Installation Instructions
Step-by-step guide for installing the track mount type.
[8] OPERATING INSTRUCTIONS
8-1. Major Parts Identification
Identifies key components of the dental light for different mount types.
8-2. Main Switch
Instructions for operating the main power switch.
8-3. Mode Selection Switch
Explanation of how to use the mode selection switch.
8-4. Touchless Switch
Details on using the touchless switch for operation and mode changes.
[9] ADJUSTING TENSION of BALANCE ARM
9-1. Adjustment of the tension of the balance arm
Procedure to adjust the tension of the balance arm for positioning.
9-2 Adjustment of the angle of the light head
Procedure to adjust the angle of the light head.
[11] MAINTENANCE AND INSPECTION
11-1. Guide for daily maintenance and inspection
Daily checks and maintenance procedures for safe operation.
11-2. Guide for Periodical Check-up
Information on periodic checks, parts, and consumables.
[12] BEFORE ASKING FOR REPAIRS
Phenomenon
Lists common phenomena and corresponding checks/actions before requesting repair.
[13] ELECTROMAGNETIC COMPATIBILITY (EMC)
4. Electromagnetic emission declaration
Declaration regarding the device's electromagnetic emissions.
5. Electromagnetic immunity declaration 1
Declaration regarding the device's electromagnetic immunity.
6. Electromagnetic immunity declaration 2
Further details on electromagnetic immunity declarations.
[14] DECLARATION OF CONFORMITY
Declaration of Conformity Details
Statement declaring compliance with relevant directives and standards.
Need help?
Do you have a question about the 905 and is the answer not in the manual?
Questions and answers