Related Manuals for Curtis G3 D1000GH13A000
Summarization of Contents
Key Features and Specifications
Key Features Overview
Highlights the primary capabilities and benefits of the G3 Digital Control Module.
Model Specifications
Details electrical, dimensional, and water supply requirements for various models.
Important Safeguards and Warnings
Safety Symbols Explanation
Explains safety alert symbols (DANGER, WARNING, CAUTION, NOTICE, IMPORTANT) used in the manual.
Sanitation and Chemical Warnings
Addresses chemical exposure warnings (Acrylamide, BPA) and links to P65Warnings.ca.gov.
General Safety Conventions
Provides general safety warnings and conventions for using the brewing equipment.
CE Requirements
Details specific requirements for operating the appliance in CE-marked regions.
Installation Instructions
Installation Requirements
Lists necessary conditions for proper brewer installation, including surface, power, and water.
Leveling the Brewer
Instructions on how to properly level the brewer using its adjustable legs.
Connecting Water Supply
Steps for flushing the water line and connecting it to the brewer.
Dual Voltage Unit Setup
Guidance for configuring brewers with dual voltage capabilities for 220-240 Volt operation.
Connecting Brewer Wiring
Details how to connect the brewer's power cord or wire it for power.
Electrical Connection and Powering Up
Explains electrical connection to outlets/junction boxes and initial brewer power-on steps.
Operating Instructions
Brewing Instructions
Step-by-step guide on how to brew coffee using the G3 brewer.
Cleaning Instructions
Daily Brewer Cleaning
Procedure for daily cleaning of the brewer, including dispensers, brew baskets, and spray heads.
Weekly Brewer Cleaning
Procedure for weekly cleaning, focusing on spray heads, dome plates, and brew basket rails.
Daily Airpot/Pour Pot Cleaning
Instructions for daily cleaning of airpots and pour pots, including washing, rinsing, and sanitizing.
Programming Guide
Accessing and Navigating Programming
Instructions on how to enter programming mode and use the navigation buttons.
Programmable Settings and Options
Details on adjusting brew volume, time, temperature, energy save, and other brewer settings.
Rough-in Drawings
D1000 Airpot Brewer Dimensions
Provides detailed dimensional drawings for D1000 Airpot Coffee Brewers with different brew baskets.
Illustrated Parts List
Main Chassis Exploded View
Diagram showing the exploded view of the main chassis components with numbered parts.
Main Chassis Parts List
Lists part numbers and descriptions for the main chassis components.
Recommended Parts to Stock
Lists essential parts recommended for stocking to ensure efficient maintenance and repair.
Illustrated Parts/Recommended Parts
Tank Assembly Parts List
Details parts for the WC-75285 Tank Assembly, including part numbers and descriptions.
Dual Voltage Tank Assembly Parts
Details parts for the WC-75284 Tank Assembly (Dual Voltage), including part numbers and descriptions.
Electrical Schematics
D1000GT12/D1000GH13 Schematics
Provides the electrical schematic and wiring diagram for D1000GT12 and D1000GH13 models.
D1000GH62/D1000GT63 Schematics
Provides the electrical schematic and wiring diagram for D1000GH62 and D1000GT63 models.
Troubleshooting Guide
General Troubleshooting & Water Heating
General guidelines, valve tests, and troubleshooting water heating issues.
Brewer Operation Faults
Diagnoses issues like overflows, no power, brew button failures, and sensor errors.
Water System & Flow Issues
Addresses problems with water tank fill, flow rate, brew strength, and dispenser levels.
Heating and Overheating Faults
Troubleshoots water not heating, heating too slowly, overheating, and related sensor errors.
Error Codes
System Fault Message Guide
Lists system fault messages like Water Level Error, Sensor Error, and Over Temp Error.
Product Warranty
Warranty Conditions and Exceptions
Outlines warranty coverage, conditions, and circumstances under which the warranty is void.
Need help?
Do you have a question about the G3 D1000GH13A000 and is the answer not in the manual?
Questions and answers