Table of Contents
Advertisement
Installation and Operation
SDP8/SDP18 Preset
Metered Dispense Valve
Pulse FC Enabled
For dispensing oil, automatic transmission fluid (ATF), gear oils, and antifreeze.
Not approved for use in explosive atmospheres or hazardous locations. For professional
use only.
See page 6 for model information.
1500 psi (10 MPa, 103 bar) Maximum Working Pressure
Important Safety
Instructions
Read all warnings and instructions
in this manual and related system
manuals before using the
equipment. Save all instructions.
NOTICE
The metered dispense valve is designed to
dispense petroleum-based lubricants, and
antifreeze only. Brake cleaner and/or harsh
solvents may damage the plastic
components.
3A6673B
EN
Advertisement
Table of Contents
Related Manuals for Graco SDP18 Series
Summarization of Contents
Warnings
SKIN INJECTION HAZARD
Warning about high-pressure fluid piercing skin, requiring immediate surgical treatment.
EQUIPMENT MISUSE HAZARD
Hazards associated with misusing the equipment, which can cause death or serious injury.
Overview
Metered Dispense Valve
Overview of the metered dispense valve and its compatibility with Pulse FC systems.
Navigation Pad (FIG. 1)
Description of the navigation pad's buttons and their functions.
Locking and Unlocking the Trigger
Instructions on how to lock and unlock the dispense trigger.
Typical Installation
Mounting Bracket
Information on the mounting bracket kit for installing the dispense valve on a console.
Oil Bar
Details about the Oil Bar kit for mounting multiple dispense valves.
Installation
Pressure Relief Procedure
Procedure to relieve pressure in the system before servicing the equipment.
Grounding
Instructions for grounding the equipment to reduce the risk of static sparking.
Pre-Installation Procedure
Steps to follow before installing the metered dispense valve.
Preset Mode
Main Menu Screen
Access to main functions: DISPENSE, TOTAL, and UTILITY MENU.
Calibration
Procedure to calibrate the meter for accurate fluid dispensing.
UTILITY MENU
DEVICE INFORMATION
Screen used for diagnostics, showing unique device identification and firmware version.
Pulse FC Mode
Enable Pulse FC Mode
Activates the meter for Pulse FC functionality, waking it from sleep mode.
Service
Battery Replacement
Instructions for replacing the four AA alkaline batteries in the meter.
Parts
Related Kits
Lists specific kits available for repair and maintenance of the dispense valve.
Technical Specifications
FCC / IC Notice
Compliance information regarding FCC and IC regulations for the device.
Need help?
Do you have a question about the SDP18 Series and is the answer not in the manual?
Questions and answers