Parts Supplied For Installation; Cabinet Opening - KitchenAid KDRP407HSS - 30" Pro-Style Dual-Fuel Range Installation Instructions Manual

Parts supplied for
installation
1"
(2.5 cm)
anti-tip
2 - #10 x 2"
brackets
phillips head screws
• Anti-tip bracket must be securely
attached to a wall stud. Thickness of
finished wall may require using
longer screws to anchor the bracket.
• L.P. conversion kit is included in
literature package.
• Backguard and island trim. The
backguard included with the range
must be installed when a standard
24" (61 cm) deep base cabinet is
used and there is zero clearance
between the back edge of range
and combustible rear wall.
For island installations or other
installations with more than 1"
(25.4 mm) clearance to back wall,
use the optional stainless steel
island trim, included with the range,
to cover the backguard mounting
flanges.
*NOTE: 36" (91 cm) min. when bottom of wood or metal
cabinet is protected by not less than 1/4" (6.4 mm) flame
retardant millboard covered with not less than No. 28 MSG
sheet steel, 0.015" (0.4 mm) stainless steel, 0.024"
(0.6 mm) aluminum or 0.020" (0.5 mm) copper.
42" (107 cm) min. clearance between the top of the
cooking platform and the bottom of an unprotected wood
or metal cabinet.
1-3/4"
9-1/4"
(4.4 cm)
(23.5 cm)
1/4" (6.4 mm)
spacer

Cabinet Opening

Dimensions
13" (33 cm) max.
upper cabinet depth
18" (45.7 cm)
upper cabinet
to countertop
junction box to be
located in this area
30" (76.2 cm)
cooktop width
26-1/2" (67.3 cm)
width with
control panel
30" (76.2 cm) min.
upper cabinet width
30-1/4" (76.8 cm)
opening width
22"
(55.9 cm)
4"
(10.2 cm)
(50.8 cm)
Product
Dimensions
36" (91.4 cm)
cooktop
height with
feet loosened
3/4 turns
30" (76.2 cm)
width
For minimum
clearance to top of
range, see NOTE.*
4" (10.2 cm) min. clearance
from both sides of range to
side wall or other
combustible material
8"
(20.3 cm)
3-1/2"
(8.9 cm)
gas line opening to be
located in this area
5-1/2" (14 cm)
12"
(30.5 cm)
20"
45" (114.3 cm)
overall height
3