Kenmore 3103 - Elite 30 in. Slide-In Gas Range Use And Care Manual page 25

Setting Oven Controls
Setting Convection Roast
This method of cooking enables you to obtain the best results when roasting. The oven can be programmed to
convection roast at any temperature from 300°F to 550°F (149°C to 288°C). Remember to use tested recipes with
times adjusted for convection roasting when using the convection mode. Times may be reduced when using the
convection feature•
INSTRUCTIONS PR ESS DISPLAY
To Set the oven to Convection Roast at 375°F
1. Arrange oven racks.
_do_,,."350"
2. Press will be displayed; CONV ROAST will flash (Figure 1).
3. Enter the desired roasting temperature using the number pads @ @ _ @
4. Press The actual oven temperature will be displayed, CONV
ROAST and the fan icon will be displayed (Figure 3).
To Change the Convection Roast temperature
(example: changing from 375°F to 425°F)
1 Press _d;_,, "375" will be displayed; CONV ROAST will flash (Figure 2).
• ,_ ,
2. Enter the desired roasting temperature using the number pads @ @ _ @
_ (Figure 4).
3. Push ,' _TA,_' ' ,the current oven temperature, CONV ROAST and the
fan icon will be displayed•
After the oven has reached the desired temperature, the control will
beep and CONY ROAST light will stay on. Note: The Bake and Broil
burners and the Convection element will also cycle for a better heat
distribution•
When convection roasting is complete press (_.
Figure 1
Figure 2
Figure 3
Figure 4
!C
:iiiiiiiiii:il
Setting Convection Convert
The %nv_ CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking• When
set properly, this feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Cony Bake, Timed Conv Bake or a Belay Start (Delayed Timed Conv
Bake) setting. When used with a Timed Bake or a Delay Start (Delayed Timed Bake) setting, the Convection Convert will
display a "CF" for check food when the bake time is 75% complete (See Fig. 8). At this time the oven control will sound 3
long beeps at regular intervals until baking had finished• When the bake time has completely finished the control will
display "End" and will sound 3 long beeps every 30 seconds until the _ pad is pressed.
To change from a normal bake recipe to a convection
bake recipe (example: changing a 400°F normal bake
recipe to a convection bake recipe)
When the conv bake mode is on at 400°F (Figure 6), press ,C_nv¢_. "CONV
BAKE" and the oven temperature adjustment will appear briefly in the
display (for this example it is 375°F) (Fig. 7) then the actual oven
temperature will be displayed. A beep will sound once the adjusted oven
temperature is reached. The display will show "375 °'', "CONV BAKE" and
the fan icon (Fig. 7).
NOTE: When using a Cook Time, the convection convert will not operate if
you have a timed bake under 20 minutes•
25
Figure 6
Figure 7
Figure 8