Kenmore 3103 - Elite 30 in. Slide-In Gas Range Use And Care Manual page 19

Slide-in models
Hide thumbs Also See for 3103 - Elite 30 in. Slide-In Gas Range:
Table of Contents

Advertisement

Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Temperature
Display and Silent Control Operation features
Setting
Oven Lockout
Feature
The (_TO_pad controls the Oven Lockout feature. The Oven Lockout feature automatically
locks the oven door and
prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
PRESS
DISPLAY
To activate
the Oven Lockout feature
1.
Press and hold _
for 3 seconds.
2.
After 3 seconds "Loc" and I_1will appear, a beep will sound
and "DOOR LOCKED" will flash in the display. Once the oven
door is locked the "DOOR LOCKED" indicator will stop flashing
and remain on along with the "Loc" (Figure 1).
for 3
seconds
Figure 1
To reactivate
normal
oven operation:
1.
Press and hold @
for 3 seconds. A beep will sound. The
"DOOR LOCKED" will flash in the display until the oven door
has completely unlocked (Figure 2).
for 3
seconds
Figure 2
2.
The wall oven is again fully operational.
,,,,,,,ii
.............
U(
Setting
Silent
Control
Operation
The DELAYTIME
_
and FLEX CLEAN _
pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change
control
from
normal
sound
operation
to
silent control operation
1.
To tell if your range is set for normal or silent operation press
and hold _.
'.... --.-- will appear and "DELAY" will flash in the
display (Figure 3). After 7 seconds "SP" (Speaker) will appear
in the display. (Figure 4)
2.
Press _
to switch between normal sound operation and
silent operation mode. The display will show either "SP"
(Figure 4) or ":=="(Figure 5).
.
If "SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If ":= =" appears (Figure 5), the control is in
the silent operation mode.
....
@
Press
to accept the change or press
to reject the
change.
@
for 7 seconds
@
Figure 3
Figure 4
Figure 5
Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature
has been reached,
even if the control is set to silent operation.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 790.3103 seriesElite 790.3104 series

Table of Contents