Rack Sensor Assembly Removal & Maintenance - Electrolux CEI30EF5GS Service Manual

Rack Sensor Assembly Removal & Maintenance
The pivot points of the oven rack sensor
assembly should be lubricated annually or more
often as needed.
Use only the approved water based graphite
lubricant available through authorized Electrolux
parts dealers. NEVER use grease or oil of any
kind to lubricate the rack sensor assembly.
To lubricate the assembly remove all oven racks
from the inside of the oven. Use the dispenser
tip of the lubricant bottle to place a few drops of
Lubricate
lubricant at the pivot points of the rack sensor
Here
assembly bar. (Photo A)
Use the lubricant sparingly, a few drops is all that
is necessary.
Photo A
To remove the rack sensor assembly begin by taking
Photo B
out the two screws in the top mounting bracket and
lifting the bracket and sensor assembly rod out of
Mtg. screws
the lower bracket. (Photo B). The lower bracket can
now be removed if necessary.
Page 40