Door Disassembly
With the outer door panel remove the door filler trims
REMOVE SCREWS
Photo A
can be removed by taking out the two screws found
in each trim. (Photo A)
Remove the air wash glass and mounting brackets by
Photo B
removing the four screws that secure the brackets to
the porcelain door liner. (Photo B)
NOTE: The mounting brackets may be attached to the top
or the sides of the airwash glass depending on model.
REMOVE SCREWS
To remove the door hinge remove two hinge
Photo C
mounting screws from the outside of the porcelain
door liner and pull the hinge out from the back.
(Photo C)
REMOVE SCREWS
The hinges used in different models have the same
Photo D
general appearance so to help identify the hinge a
color stripe is painted onto the spring. (Photo D)
When replacing the hinge make sure that the
spring color matches the color stated in the parts
description from the part list.
7316508700 Hinge Assembly, door, blue
Page 33