Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genesis XT Series
Summarization of Contents
Component Identification
Major Structural Parts
Identifies main body, jaws, pivot group, and attachment points of the shear.
Blade Components and Systems
Details piercing, guide, razor blades, and the AutoGuide system.
Maintenance Checklists
4-Hour Checklist
Outlines brief visual checks and greasing points for every four hours of operation.
8-Hour Checklist
Details in-depth inspections, greasing, and jaw/blade checks every eight hours.
Greasing Procedures
Grease Locations and Method
Specifies grease points and the procedure for greasing shear components.
Blade Maintenance
AutoGuide Adjustment
Covers shimming tolerance and replacement for the AutoGuide system.
Piercing Blade Care
Details required gaps, wear limits, and critical contact areas for piercing blades.
Guide Blade Maintenance
Describes wear limits, gap adjustment, and shimming tolerances for guide blades.
Cutting Blade Maintenance
Outlines wear limits, rotation intervals, and shimming tolerances for cutting blades.
Welding Procedures
General Welding and Grounding
Provides guidelines for welding and proper ground clamp connection.
Welding Rules and Cooling
Details steps before, during, and after welding, including cooling.
Build-Up Procedure
Jaw Build-Up Steps
Explains the procedure for building up jaw profiles and protection strips.
Hard-Surfacing
Hard-Surfacing Procedure
Outlines the steps for applying hard-surfacing material to components.
Hard-Surfacing Patterns
Details specific hard-surfacing patterns for the upper jaw, lower jaw, and chin.
Shear Jaw Armor Maintenance
Weld Inspection and Repair
Focuses on checking Shear Jaw Armor welds for wear and cracking.
Need help?
Do you have a question about the XT Series and is the answer not in the manual?
Questions and answers