Related Manuals for Kilews KTM-50S
Summarization of Contents
Caution for Safety
Keep Work Area Clean
Ensure the work area is free from clutter to prevent injuries.
Consider Work Area Environment
Use the torque meter in appropriate environmental conditions, avoiding rain or dampness.
Keep Children Away
Ensure only authorized personnel are in the work area.
Dress Properly
Avoid loose clothing or jewelry that could get caught in moving parts.
Work with the Most Care
Handle the product carefully, considering its operation and environment.
Fix Main Body Firmly
Securely fix the instrument, especially for large torque measurements.
Do Not Exceed Permissible Load
Avoid exceeding the maximum load to prevent damage and accidents.
Do Not Disassemble, Shock, or Vibrate
Do not disassemble, shock, or vibrate the precise instrument to prevent damage.
Caution for Electric Shock
Avoid touching the power plug with wet hands to prevent electric shock.
Use Exclusive Charger
Use only the specified charger to prevent fire or injury.
Charge Properly
Charge according to indicated voltage and time, in a ventilated place.
Never Throw Battery Into Fire
Dispose of batteries according to local laws to prevent explosion or toxic substance release.
Turn Off When Not Used or Danger Expected
Turn off the instrument when not in use, during repair, or if danger is expected.
Maintain Torque Meter With Care
Regularly check screw joints and cords for wear or damage.
Specifications
KTM-10/KTM-100 Specifications
Detailed specifications for KTM-10 and KTM-100 models.
KTM-50S Specifications
Detailed specifications for the KTM-50S model.
Setting and Measuring Mode for KTM-100/KTM-10
Mode Setting
How to select the measurement mode (PP, PD, or immediate value).
Test Unit Selection
How to select the desired measurement unit (Lbf.in, Kgf.cm, N.m).
Functional Setting Key Operation
Explains the use of functional setting keys in conjunction with UP/DOWN keys.
Setting Proper Value Range of Torque
How to set minimum and maximum torque limits for judging results.
Setting Procedure
Step-by-step guide for setting torque limits and other functions.
Maximum, Minimum, Average Value
Using the AVE key to test and display max, min, and average values.
Data Saving, Display, Output
How data is saved, displayed, and outputted via USB.
Preparation and Measuring Method
Installation
Instructions for installing and securing the measuring instrument.
Setup in Measurement Mode
Choosing the correct measurement mode (PP, TRACK, PD).
Measuring Method
Step-by-step guide on how to perform measurements.
Power Supply
Information on power supply, battery capacity, and charging procedures.
Data Transfer (PEAK Mode Only)
How to transfer data, specifically for PEAK mode.
Data Format
Specifies the data format for RS-232C output.
Output Method of Data
Details on how data output is initiated.
Electric Screwdriver & Torque Meter
Torque Adjustment for Electric Screwdriver
How to adjust torque output on electric screwdrivers.
Torque Meter Operating Method
Guide on using the torque meter with electric screwdrivers.
Test Procedures
Steps for conducting tests using the torque meter and electric screwdriver.
Need help?
Do you have a question about the KTM-50S and is the answer not in the manual?
Questions and answers