Using The Menus; How To Use The Menus; The Image Adjustment Menu - Toshiba TDP-T355 Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons on the control panel (main unit side) and remote control.
p.16

How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
Display the Setting display menu.
2. Select a Category
Select a category by using .
There are following five
Image adjustment
categories:
Contrast
Brightness
Image adjustment menu p.39
Picture mode
R-level
G-level
B-level
Display setting menu p.41
Auto setting
Phase
Default setting menu p.44 Frequency
H-position
V-position
Control setting menu p.46 Clamp 1
Clamp 2
Status display menu p.48
3. Adjustments & Settings
Press
Item
Adjustment/Setting Value
+16
Brightness +16 +12
Language
Standard
+16
These marks signify
+16
+16 the items can be
Execute
adjusted/set by using
30
.
+64
+64
+32
255
255
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use
the following pages as a reference.
4. Back RETURN button
5. End Press the MENU button or RETURN button.
(The menu disappears 30 seconds after the last operation.)
Displays the current
adjustments and
settings of selected
+12
category.
+12
Bright
Item shown with gray
+12
+12 cannot be adjusted with
+12
the current input source.
+12
+12
+12
+12
+12
+12
To image adjustment menu
or to open the menu.
These marks
signify that
there are setting
Off
English
Off
screens. Press
On On
or
On Manual
display a list of
These marks
On
Low
setting screens.
signify that there
Standard
are options.
1
Press or
Key lock Off
to display a list of Yes
options.
* When no item is
changed, press
Toggle items with .
Select items with and press .
Fix selection with .
38

The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with "Yes", and those that cannot are marked with "No". (When an item is masked,
it indicates that you cannot select for the current input.)
Item
Contrast Adjust the image contrast.
Brightness Adjust the brightness of the image.
Color Adjust the color of the image.
Tint *1 Adjust the tint of the image color.
Sharpness Adjust the sharpness of the image.
Noise Set the function to reduce screen noise.
reduction
*2
Picture mode Press
Bright/Standard/True color
R-level Adjust red of the image color.
to
G-level Adjust green of the image color.
B-level Adjust blue of the image color.
NTSC mode *3 Set the black level with
US
.
JAPAN:NTSC (JAPAN) mode
Auto setting Automatically adjusts items such as the
sampling phase depending on the type of
input signal.
Phase Adjust with
Frequency Adjust with
patterns and flickering when many vertical
lines appear on the screen.
H-position Adjust the horizontal position of the image.
Digital (DVI) Analog (D-SUB)(BNC)
Description
RGB Y/P
Yes
Lower Higher
Yes
Darker Brighter
No
Lighter Deeper
No
Reddish Greenish
No
Softer Sharper
No
On (Enable) Off (Disable)
. Toggle the picture mode with Yes
.
Yes
Less red More red
Yes
Less green More green
Yes
Less blue More blue
. No
:NTSC (US) mode
No
to eliminate flicker. No
to eliminate periodic No
No
Move left Move right
39
Video S-video
/P RGB Y/P /P
B R B R
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes No Yes Yes Yes
No No No Yes Yes
Yes No Yes Yes Yes
Yes No Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
No No No Yes Yes
No Yes No No No
No Yes No No No
No Yes No No No
No Yes No No No