Parts On The Rear Panel - Toshiba TDP-T355 Owner's Manual

Parts on the rear panel

(1) (2) (3) (4) (5)
(8) (9)
Name : Main Function
(1) Infrared remote sensor : Senses commands from the remote control.
(2) CONTROL terminal
LAN : Connects a network cable.
RS232C : When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
(3) COMPUTER (Y/P /P ) 2 IN terminal
B R
RGB : Input analog RGB signal from a computer or other
source, or a component video signal (Y/P
video equipment.
AUDIO : Input audio signals.
(4) COMPUTER (Y/P /P ) 1 IN terminal
B R
DVI-I : Input analog or digital RGB signal from a computer, or
a component video signal (Y/P
equipment.
AUDIO : Input audio signals.
(5) MONITOR terminal : Connect to a computer display, etc.
(6) AUDIO OUT terminal : Outputs audio signals.
(7) COMPUTER (Y/P /P ) 3 IN terminal
B R
BNC : Input G/B/R/HD/VD signal from a computer, or a
component video signal (Y/P
equipment.
AUDIO : Input audio signals.
(8) CAMERA POWER terminal : DC power supply terminal (+15 V). Reserved for future
use.
(6) (7)
(10) (11)
p.20
p.59
/P ) from
B R
/P ) from video
B R
/P ) from video
B R
18
Name : Main Function
(9) VIDEO IN terminal
S-VIDEO : Input S video signals from video equipment.
AUDIO (L/R) : Input audio signals from video equipment.
VIDEO : Input video signals from video equipment.
AUDIO (L/R) : Input audio signals from video equipment.
(10) AC IN socket : Connect the supplied power cord here.
(11) Main power switch : AC power line ON (standby)/OFF.
19