Related Manuals for GW Instek MDO-2202A
Summarization of Contents
USER MANUAL
Mixed-Domain Oscilloscope
Introduces the MDO-2000A Series user manual.
ISO-9001 Certified Manufacturer
Indicates the manufacturer is certified under ISO-9001.
Table of Contents
SAFETY INSTRUCTIONS
Provides essential safety guidelines for instrument operation.
GETTING STARTED
Covers initial setup and basic operation of the MDO-2000A Series.
MEASUREMENT
Details various measurement functions and techniques available on the oscilloscope.
ADVANCED CONFIGURATION
Explores advanced settings for acquisition, display, and signal analysis.
ARBITRARY WAVE GENERATOR
Describes the operation and features of the built-in arbitrary waveform generator.
SPECTRUM ANALYZER
Explains how to use the spectrum analyzer function for frequency domain analysis.
APPLICATIONS
Covers various software applications like DVM, Data Log, and FRA.
SAVE/RECALL
Details procedures for saving and recalling instrument settings and data.
FILE UTILITIES
Manages files, folders, and USB storage for the instrument.
HARDCOPY KEY
Explains the functionality of the hardcopy key for printing or saving.
REMOTE CONTROL CONFIG
Covers configuration for remote control via USB and Ethernet interfaces.
MAINTENANCE
Outlines maintenance procedures like calibration and compensation.
FAQ
Provides answers to frequently asked questions about the instrument.
APPENDIX
Contains supplementary information such as firmware updates and specifications.
SAFETY INSTRUCTIONS
Safety Symbols
Explains the meaning of various safety symbols used in the manual.
General Safety Guidelines
Lists general safety precautions for operating the MDO-2000A series.
Power Supply Safety
Details power supply requirements and safety precautions.
Cleaning and Operation Environment
Provides cleaning instructions and specifies operating conditions for the instrument.
GETTING STARTED
MDO-2000A Series Overview
Provides an overview of the MDO-2000A series instruments and lineup.
Appearance and Panel Layout
Describes the physical appearance and layout of the oscilloscope's front and rear panels.
Initial Setup Procedures
Guides the user through the initial setup procedures for the device.
Built-in Help System
Explains how to access and use the oscilloscope's on-screen help system.
Appearance and Front Panel Controls
Menu Keys and Navigation
Explains the usage of side and bottom menu keys for navigation and selection.
Hardcopy and Function Keys
Details the function of the Hardcopy key and various function keys for accessing features.
Variable Knob and Select Key Operation
Describes how to use the Variable knob and Select key for parameter adjustment and selection.
Autoset Function
Describes the Autoset function for automatic configuration of display parameters.
Basic Operations and Controls
Run/Stop and Single Trigger Modes
Explains how to freeze waveforms using the Run/Stop key or Single Trigger mode.
Default Setup and Horizontal Controls
Resets the system to defaults and details horizontal controls for waveform viewing.
Oscilloscope Features Overview
Search and Trigger Controls
Covers controls for trigger setup and using the search function for events.
Vertical Position and Channel Controls
Describes adjusting vertical position and using channel menu keys.
Interface Elements and Connections
External Trigger, Math, Reference, and Bus Keys
Explains functions of external trigger, math, reference, and bus keys.
Channel Inputs and USB Host Port
Details channel input specifications and the USB host port for data transfer.
Rear Panel Ports and Display Overview
Rear Panel Connectors
Shows the layout and ports on the rear panel of the MDO-2000A and MDO-2000AG series.
Calibration Output
Details the calibration output signal and its purpose.
Interface Ports and Outputs
Describes USB, LAN, Security Slot, Go-No Go, and AWG outputs.
Main Display Description
Provides a general description of the main display and its functions.
Waveform Display Elements
Waveform Status Indicators
Shows indicators for channel, horizontal, trigger status, position, level, frequency, and memory bar.
Waveform Data Display
Displays analog waveforms, bus decoding, reference waveforms, and channel indicators.
Instrument Status and Configuration
Trigger Status and Acquisition Modes
Describes trigger status indicators and acquisition modes: Normal, Peak Detect, Average.
Signal Frequency and Trigger Configuration
Shows signal frequency, trigger configuration, horizontal status, and channel status.
Initial Device Setup
Tilt Stand and Power Up
Explains adjusting the tilt stand and powering on the oscilloscope.
First Time Use Guide
Provides a step-by-step guide for setting up the instrument for initial operation.
Basic Waveform Operations
Signal Capture and Display Modes
Describes using Autoset for signal capture and selecting Vector display mode.
Probe Compensation Procedure
Guides on adjusting the probe for optimal signal display.
Manual Usage Conventions
Provides guidance on understanding the manual's conventions and structure.
Navigating the User Interface
Menu Item and Parameter Selection
Explains how to select menu items, parameters, or variables using the controls.
Menu Navigation Examples
Toggling Parameters and Reducing Menus
Explains how to toggle parameters and reduce side menus.
Reducing Lower Menus and Removing All Menus
Explains how to reduce lower menus and remove all displayed menus.
Removing On-Screen Messages
Explains how to use the Menu Off key to clear on-screen messages.
Built-in Help System Guide
Accessing and Operating Help
Guides on accessing and using the instrument's built-in help system and panel operations.
Help Menu Navigation Keys
Explains the function of Home, Go Back, and Exit keys within the help menu.
MEASUREMENT FUNCTIONS
Basic Measurement Operations
Covers fundamental operations for capturing and viewing input signals.
Channel Activation and Deactivation
Guides on activating and deactivating input channels for measurement.
Automatic Measurement Features
Details how to perform and manage automatic measurements and their items.
Cursor Measurement Techniques
Explains how to use horizontal and vertical cursors for waveform analysis.
Math Operation Functions
Covers performing basic math functions like addition, subtraction, multiplication, and division.
Waveform Measurement Details
Amplitude, High, Low, and Mean Measurements
Describes measurements for amplitude, high/low voltage, and mean values.
Cycle, RMS, Area, and Overshoot Measurements
Explains cycle mean, RMS, area, and overshoot measurements.
Time and Delay Measurement Types
Covers measurements related to time, such as frequency, period, and delay.
Pulse, Flicker, and Edge Measurements
Describes measurements for pulses, flicker, and edges.
Measurement Configuration and Management
Adding and Removing Measurements
Guides on adding multiple automatic measurements and removing them.
Gated Measurement Modes
Explains limiting automatic measurements to a specific area using cursors.
Display All Mode and Delay Measurements
Shows all measurements and notes delay measurements' availability.
High-Low Functionality
Explains how to select methods for determining High-Low measurement values.
Statistics and Reference Levels
Explains viewing statistics for measurements and setting reference levels.
Cursor Measurement and Usage
Horizontal Cursor Operations
Guides on activating and using horizontal cursors for measurements.
Vertical Cursor Operations
Guides on activating and using vertical cursors for measurements.
FFT and XY Mode Cursors
Details FFT and XY mode cursors and their measurement capabilities.
Math and FFT Operations
Basic Math Operations
Covers performing basic math functions like addition, subtraction, multiplication, and division.
FFT Overview and Window Functions
Explains the Fast Fourier Transform and available window functions.
FFT Operation Procedures
Guides on performing Fast Fourier Transform analysis.
Advanced Math Overview
Introduces advanced math functions and their parameters.
Advanced Math Operation Steps
Details how to create and perform advanced mathematical expressions.
ADVANCED CONFIGURATION OPTIONS
Acquisition Settings
Explains the process of sampling analog input signals into digital format.
Segmented Memory Acquisition
Details the utility for dividing scope memory into segments for optimized acquisition.
Display Settings
Covers display settings like waveform appearance, persistence, and intensity.
Horizontal View Controls
Covers setting horizontal scale, position, and waveform display mode.
Vertical View and Channel Settings
Explains how to set vertical scale, position, and coupling mode for channels.
Bandwidth and Expansion Settings
Details bandwidth limitation and signal expansion relative to ground or center.
Probe Configuration and Deskew
Guides on setting probe type, attenuation, and deskew compensation.
Bus Configuration and Triggering
Covers configuration for serial bus inputs, display, and triggering.
Trigger Setup and Parameters
Explains trigger types, sources, parameters, and modes for waveform capture.
Search Functionality
Describes using the search feature to find events in analog and digital channels.
System Settings and Maintenance
Menu Language and System Information
Guides on selecting menu language and viewing system information.
Memory Management
Details the process of erasing internal waveforms, setup files, and labels.
Date, Time, and Probe Compensation Setup
Guides on setting date/time and probe compensation frequency.
QR Code Reader Function
Describes the QR code reader function for accessing websites.
ARBITRARY WAVE GENERATOR OPERATION
AWG Overview and Connections
Introduces the AWG and details rear panel layout and generator connections.
Output Setup and Channel Selection
Covers selecting channels, turning output on/off, load impedance, and phase.
GEN1 and GEN2 Setup Procedures
Covers selecting waveform, settings, and creating arbitrary waveforms.
Waveform Settings: Frequency, Amplitude, Offset
Details setting frequency, amplitude, and offset for selected waveforms.
Modulation Functions: AM, FM, FSK
Explains Amplitude, Frequency, and Frequency Shift Keying Modulation settings.
Sweep Functionality
Covers sweep function for linear or logarithmic sweeping.
Managing Arbitrary Waveforms
Details creating, editing, recalling, and saving arbitrary waveforms.
Waveform Editing Methods
Explains Normal Edit and Function Edit methods for modifying waveforms.
Loading Arbitrary Waveforms
Guides on loading ARB waveforms from internal memory or USB.
Saving Arbitrary Waveforms
Details saving ARB waveforms to internal memory or USB.
Waveform Coupling and Tracking
Explains coupling and tracking waveform settings between GEN1 and GEN2.
SPECTRUM ANALYZER OPERATIONS
Spectrum Analyzer Overview
Introduces the Spectrum Analyzer as a real-time tool for frequency domain analysis.
Display Overview and Information
Explains the main display and its components for spectrum analysis.
Connections and Configuration
Details connecting signal sources and configuring spectrum traces.
Trace Mode Options
Details trace options like Normal, Max/Min Hold, and Average.
Detection Method Settings
Explains selecting detection methods (Sample, Peak, Average) for trace data.
Frequency, Span, and Bandwidth Configuration
Guides on setting center frequency, span, and bandwidth for analysis.
Amplitude Configuration
Explains how to configure vertical scale and zero reference position.
Spectrum Analyzer Measurement Tools
Covers measurement tools like search and cursors for frequency domain analysis.
APPLICATIONS
Introduction to Applications
Introduces the Application (APP) function and available software applications.
Running Applications Guide
Guides on activating pre-installed applications from a dedicated menu.
Go-NoGo Application
Explains the Go-NoGo test for checking waveform compliance with boundaries.
DVM Application
Details the Digital Voltmeter application for measuring voltage and current.
Data Log Application
Explains the Data Log app for logging waveform data or screenshots.
Digital Filter Application
Describes the Digital Filter app for applying high, low, or band pass filters.
Mask Application Features
Explains creating shape templates for comparing input signals.
FRA Application Overview
Details the Frequency Response Analyzer application for plotting gain and phase responses.
Mask Application Setup
Source Channel Selection
Guides on selecting the source channel for mask comparison.
Mask Violation Configuration
Details setting mask violation conditions (Stop, Continue, Save).
Auto Mask Creation
Guides on creating a mask shape from an existing waveform.
User Defined Mask Creation
Guides on creating user-defined masks with multiple areas and points.
SAVE/RECALL FUNCTIONS
File Format and Utility Options
Covers image, waveform, and spreadsheet file formats and utilities.
Waveform File Formats
Details LSF and CSV file formats for storing and recalling waveforms.
Setup File Format and Contents
Describes proprietary setup file format and its saved settings.
Save and Recall Operations
Covers creating/editing file labels for channels, reference files, and setups.
Save File Procedures
Details saving panel setup, waveform data, and display images.
Save Image Functionality
Explains saving display images using Save/Recall or Hardcopy keys.
Save Waveform Procedures
Guides on saving waveforms to internal memory or USB flash drive.
Save Setup Procedures
Details saving instrument setup configurations to internal memory or USB.
Recall Operations
Covers recalling default panel settings, reference waveforms, and setups.
Recall Waveform Functionality
Guides on recalling stored waveforms from internal memory or USB.
Recall Setup Functionality
Explains how to recall saved instrument setup configurations.
Reference Waveforms Display
Explains how to recall and display stored reference waveforms.
FILE UTILITIES MANAGEMENT
File Utilities Overview
Describes file utilities for managing files and folders on internal or external memory.
File Navigation and Path Settings
Guides on navigating the file system and setting file paths.
Create and Manage Folders
Explains how to create new directories within the file system.
Rename and Delete Files/Folders
Guides on renaming files and deleting files or folders.
Copy File to USB
Details copying files from internal memory to a USB drive.
HARDCOPY KEY FUNCTIONS
Printer I/O Configuration
Covers connecting a PictBridge printer and configuring USB device port settings.
Print Output Procedures
Explains printing the display image using the Hardcopy key and Ink Saver function.
Save Functionality via Hardcopy Key
Details saving screen shots, waveforms, or setups using the Hardcopy key.
Image File Format Options
Explains selecting file formats (BMP, PNG) for saved image files.
Ink Saver Functionality
Explains using Ink Saver to achieve a white background for image files.
REMOTE CONTROL CONFIGURATION
Interface Configuration: USB
Guides on configuring the USB interface for computer connection.
USB Functionality Check
Explains how to check USB functionality using a terminal application.
Ethernet Interface Configuration
Covers configuring Ethernet settings like IP address and domain name.
Socket Server Configuration
Details setting up the socket server for remote communication over LAN.
Socket Server Functionality Check
Guides on testing socket server functionality using NI Measurement & Automation Explorer.
MAINTENANCE OPERATIONS
Signal Path Compensation (SPC) Function
Explains using SPC to compensate internal signal path for ambient temperature accuracy.
Vertical Accuracy Calibration
Guides on performing vertical accuracy calibration for the oscilloscope channels.
Probe Compensation Procedure
Details connecting the probe and adjusting for optimal square waveform.
Frequently Asked Questions (FAQ)
Troubleshooting Display and Signal Issues
Addresses common issues like signal not appearing, frozen waveform, or probe distortion.
Measurement and Setting Adjustments
Covers issues with Autoset, printout darkness, date/time, and accuracy.
APPENDIX
Firmware Update Procedure
Guides on downloading and updating the oscilloscope firmware via USB.
MDO-2000A Series Specifications
Provides detailed specifications for model-specific and common features.
Probe Specifications
Lists specifications for compatible probes like GTP-100B-4, GTP-200B-4, GTP-300B-4.
Dimensions and Declaration of Conformity
Provides instrument dimensions and compliance declarations.
Need help?
Do you have a question about the MDO-2202A and is the answer not in the manual?
Questions and answers