Deleting Selected Data: Deleting Single Specified Stored Data - Kanomax 6115 Operation Manual

4. Saving and Deleting Measurement Data

4.2.3 Deleting Selected Data: Deleting Single Specified Stored Data

DISPLAY
<Stored Measurement Data Display>
Total amount of stored
measurement data
Press
(Measurement Mode) to display the Stored Measurement Data Display
m/s
in the Calculation Mode.
(For details on Calculation Mode, refer to "5. Measuring AVG, MAX
and MIN Value" in page 17.)
Data Number
Press
to delete.
Press
(This procedure can be performed in any measurement mode of
measuring Air Velocity, Air Temperature, and Pressure.)
m/s
When you hear a beep sound, the data is deleted and the total amount
of the stored data is displayed. Then it will return to the screen showing
the stored measurement data.
To delete data successively, press
that you want to delete, and press
to delete it. You can delete only one data at a time.
m/s
After the selected page is deleted, the page number of the remaining
data will shift up. (See example below.)
Example:
There are four data. If the 3
up to the 3
PROCEDURE
key 4 times on the Normal Measurement screen
key to select the number of the data you would like
key for 4 seconds or longer to delete the selected data.
rd
data is deleted, the 4
rd
data, and the data from page 1 to page 3 will be remained.
Data1
Data2
Data 3
Data 4
key to select the data
key for 4 seconds or longer
th
data will be shifted
Data 1
Data 1
Data 2
Data 2
Data 4
Data 3
The data number changes
16